629389

Ten Haaft Cytrac DX Vision III Manual

24
Zoom out
Zoom in
Previous page
1/28
Next page
The increasing number of TV satellites gave rise to the demand of being able to
receive channels from different satellites.
To facilitate the switching between different satellites, the DiSEqC system has been
developed. This system is incorporated in the receiver and generates a switching
signal that allows the user to view channels of several satellites by simply changing
the TV channel.
The system was initially designed for permanently installed home systems. In such
installations, the individual reception units (satellite dishes) were connected to a
DiSEqC-capable multi-switch (located under the building roof for obvious reasons)
to which the satellite receiver was connected as well.
When the receiver sends a DiSEqC signal to the multi-switch, the switch connects
the receiver to the system aimed at the respective satellite.
The DiSEqC signals are standardized and are generated by almost all state-of-the-
art (DVB-S) satellite receivers.
The Vision system uses this DiSEqC signal to automatically move the antenna into
anyone of the up to 16 preset satellite positions. Please mind that the initial con-
figuration of a DiSEqC system is relatively complex and can be a challenge even to
experienced users.
When in doubt, have the system configured by a qualified expert. The system will of
course only function properly if the preset satellites are actually receivable at your
current location.
* DiSEqC (Digital Satellite Equipment Control) is a registered trademark of the
satellite operator EUTELSAT.
What is DiSEqC?
24
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ten Haaft Cytrac DX Vision III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ten Haaft Cytrac DX Vision III in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ten Haaft Cytrac DX Vision III

Ten Haaft Cytrac DX Vision III User Manual - German - 28 pages

Ten Haaft Cytrac DX Vision III User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info