Manual Ten Haaft Caro Plus Vision III (page 23 of 28) (English)

629387

Zoom out

Zoom in

1/28

Satellite settings / DiSEqC V3-ID

This function allows you to display and edit a DiSEqC ID number from the list stored

in the Vision system‘s DiSEqC ID list.

Select a satellite and press the OK button to conﬁrm. The DiSEqC ID number

is displayed. At this point you can set the DiSEqC ID number that your receiver is

sending for this satellite.

Satellite settings / DiSEqC Rec-ID

Each time a programme is changed, a DiSEqC-capable receiver sends a unique DiSE-

qC ID number assigned to the satellite transmitting this programme.

You can view the DiSEqC ID sent by the receiver if you enable the function „DiSEqC

Rec-ID“ by pressing the OK button .

Now select at the receiver a programme transmitted by the speciﬁed satellite. After

a short delay, this satellite‘s DiSEqC ID will be displayed at the control device.

Now you must assign this number to the same satellite in the Vision system.

Program or edit this DiSEqC ID number as described under „Satellite settings / DiSE-

qC V3-ID“.

Satellite settings / DiSEqC Data

These data are displayed after the system is switched on by pressing the OK button

and after the receiver has sent the DiSEqC signal to the Vision system.

The information is actually intended for professional users. It represents a comple-

te DiSEqC-ID transfer protocol and is displayed with four data bytes, allowing the

identiﬁcation of any deviations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ten Haaft Caro Plus Vision III in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ten Haaft Caro Plus Vision III

Ten Haaft Caro Plus Vision III User Manual - German - 28 pages

Ten Haaft Caro Plus Vision III User Manual - Dutch - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ten Haaft Caro Plus Vision III Manual

Product: