Manual Telwin START PLUS 6824 (page 3 of 60) (All languages)

649707

Zoom out

Zoom in

1/60

____________________(EN)____________________

INSTRUCTION MANUAL

GENERAL INFORMATION

A real, portable, battery-powered starter. Ideal for anyone

needing a starter. Its applications include boats, cars,

trucks, power generators, and yet more.

Fully compatible with any 12-volt or 24-volt starter system.

The Starter uses SEALED MAINTENANCE-FREE

BATTERIES (AGM) which means that the unit can be

installed in any position, in any location, without the fear

of any acid leaks.

Keep this manual.

The manual should be read, paying attention to all the

warnings and safety precautions to be taken when using

and maintaining the device, the list of components and all

technical specications.

Please keep this manual in a secure and dry place for

future reference.

PLEASE READ ALL THE INSTRUCTIONS BEFORE

USING THE STARTER!

WARNINGSANDSAFETYPRECAUTIONS

Warning:inordertoreducetheriskofpersonalinjury

and damage to equipment, it is highly recommended

to comply with all essential safety measures and

precautions when using the starter.

Protect the eyes. Always wear protective

goggles when using acid lead accumulators.

Avoid contact with battery acid. If annul

operator should be sprayed or come into

contact with the acid, rinse the parts

immediately under clean running water. Continue to

rinse the area until the physician arrives.

It is important to connect the cables with the

poles in the right direction. Connect the red

clamp (+) to the positive battery terminal,

and the black clamp (-) to the negative terminal.

Use the starter in well ventilated areas. Do not

attempt to use the starter when there is gas or

inammable liquids in the vicinity.

Make sure that the black and red clamps

never come into contact or touch a common

conductor as this could cause them to fuse

together or with other metal objects.

WARNING! In order to prevent damage caused

by accidental contact, disconnect the mounting

socket (12V / 24V) from the starter panel and

place the clamps in the holder.

5- FOR 12 or 24 VOLT SYSTEMS ONLY! This device

is destined for use on embarkations and vehicles

running on 12 or 24 Volt electrical systems only.

6- USE ONLY IN EMERGENCIES: do not use the

starter instead of the vehicle battery. Use it during

start-up operations only.

7- Do not work alone. If there is an accident, the

assistant can be of assistance to the operator.

Try to avoid electrical shocks. Be very

cautious when applying the clamps to non-

insulated conductors or bus bars. Avoid all

body contact with surfaces of tubes, radiators, and

metal power substations whilst testing the voltage.

9- Keep the work area clean at all times. Untidy

cumbersome areas can lead to injuries.

10- Protect the starter appropriately from all possible

damage. It must only be used as indicated in this

Instruction Manual.

11- Ensure compliance with the indications in the work

area. Do not use in humid or wet facilities. Never

leave it out in the rain. Always work in well lit areas.

12- Do not expose to direct sunlight, heat sources or

humidity.

13-

Keep out of children’s reach: they must

never be allowed to access work areas or

handle any machines, tools or extensions.

14- When the starter is not being operated, it must be

stored in a dry area to prevent rust from forming.

Always store the starter under lock and key and keep

out of reach of children.

15-

Always wear suitable clothing.

Never wear baggy clothing or

jewellery that can get caught up in

moving parts. During all operations, the use of

electrically insulated protection clothing and non-slip

boots must be worn at all times. Persons with long

hair must wear a hair net.

16- Only experts are allowed to do repair work on the

machine as it involves signicant risk levels for

inexperienced workers.

17- Replacing parts and accessories: when performing

maintenance operations, use identical spare parts

only (see Spare Part list). Use of any other spare

parts invalidates all warranties.

18- Make sure that the device is always positioned in a

stable and well supported manner.

Never climb over cables or electrical structures.

19- Careful attention must be paid when maintaining the

starter. Check the condition of cables on a regular

basis and if any damage is detected, have the same

repaired by an authorised technician.

20- Check there are no damaged parts. Before using this

starter, carefully check all seemingly damaged parts

and assess whether or not they can operate correctly.

Check that the cables are securely fastened to the

starter. Remember that only qualied technicians are

allowed to repair or replace damaged parts.

INSTALLATION

ASSEMBLY (Fig. C)

Unpack the starter and assemble the separate parts

included in the package.

OPERATING PROCEDURES

WARNING:Electricshocksmaycause

injury or death. Do not touch bare

electrical conductors.

The starter is designed for use on vehicles or boats. It

does not need another vehicle or a 230V AC power

supply socket.

This starter can also be used as a portable, 12V DC,

power supply for remote areas or in emergencies.

Using the starter to start a vehicle

WARNING: follow these instructions

meticulously, and always in the order given

below!

- Check that the starter clamps are NOT powered up: the

mounting socket (Fig. A-1) must be disconnected.

- Make sure that the vehicle or boat to be started is

switched off - switch or ignition key in the OFF position.

- First connect the red clamp to the positive terminal on

the vehicle battery.

- Then connect the black clamp to a non-movable metal

part of the engine; do not connect the clamp to the

negative terminal on the battery.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telwin START PLUS 6824 in the language / languages: All languages as an attachment in your email.

The manual is 1,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telwin START PLUS 6824 Manual

Product: