649703
3
Zoom out
Zoom in
Previous page
1/60
Next page
3
____________________(EN)____________________
INSTRUCTION MANUAL
GENERAL INFORMATION
A real, portable, battery-powered starter. Ideal for anyone
needing a starter. Its applications include boats, cars,
trucks, power generators, and yet more.
Fully compatible with any 12-volt or 24-volt starter system.
The Starter uses SEALED MAINTENANCE-FREE
BATTERIES (AGM) which means that the unit can be
installed in any position, in any location, without the fear
of any acid leaks.
Keep this manual.
The manual should be read, paying attention to all the
warnings and safety precautions to be taken when using
and maintaining the device, the list of components and all
technical specications.
Please keep this manual in a secure and dry place for
future reference.
PLEASE READ ALL THE INSTRUCTIONS BEFORE
USING THE STARTER!
WARNINGSANDSAFETYPRECAUTIONS
Warning:inordertoreducetheriskofpersonalinjury
and damage to equipment, it is highly recommended
to comply with all essential safety measures and
precautions when using the starter.
1-
Protect the eyes. Always wear protective
goggles when using acid lead accumulators.
2-
Avoid contact with battery acid. If annul
operator should be sprayed or come into
contact with the acid, rinse the parts
immediately under clean running water. Continue to
rinse the area until the physician arrives.
3-
It is important to connect the cables with the
poles in the right direction. Connect the red
clamp (+) to the positive battery terminal,
and the black clamp (-) to the negative terminal.
Use the starter in well ventilated areas. Do not
attempt to use the starter when there is gas or
inammable liquids in the vicinity.
4-
Make sure that the black and red clamps
never come into contact or touch a common
conductor as this could cause them to fuse
together or with other metal objects.
WARNING! In order to prevent damage caused
by accidental contact, disconnect the mounting
socket (12V / 24V) from the starter panel and
place the clamps in the holder.
5- FOR 12 or 24 VOLT SYSTEMS ONLY! This device
is destined for use on embarkations and vehicles
running on 12 or 24 Volt electrical systems only.
6- USE ONLY IN EMERGENCIES: do not use the
starter instead of the vehicle battery. Use it during
start-up operations only.
7- Do not work alone. If there is an accident, the
assistant can be of assistance to the operator.
8-
Try to avoid electrical shocks. Be very
cautious when applying the clamps to non-
insulated conductors or bus bars. Avoid all
body contact with surfaces of tubes, radiators, and
metal power substations whilst testing the voltage.
9- Keep the work area clean at all times. Untidy
cumbersome areas can lead to injuries.
10- Protect the starter appropriately from all possible
damage. It must only be used as indicated in this
Instruction Manual.
11- Ensure compliance with the indications in the work
area. Do not use in humid or wet facilities. Never
leave it out in the rain. Always work in well lit areas.
12- Do not expose to direct sunlight, heat sources or
humidity.
13-
Keep out of children’s reach: they must
never be allowed to access work areas or
handle any machines, tools or extensions.
14- When the starter is not being operated, it must be
stored in a dry area to prevent rust from forming.
Always store the starter under lock and key and keep
out of reach of children.
15-
Always wear suitable clothing.
Never wear baggy clothing or
jewellery that can get caught up in
moving parts. During all operations, the use of
electrically insulated protection clothing and non-slip
boots must be worn at all times. Persons with long
hair must wear a hair net.
16- Only experts are allowed to do repair work on the
machine as it involves signicant risk levels for
inexperienced workers.
17- Replacing parts and accessories: when performing
maintenance operations, use identical spare parts
only (see Spare Part list). Use of any other spare
parts invalidates all warranties.
18- Make sure that the device is always positioned in a
stable and well supported manner.
Never climb over cables or electrical structures.
19- Careful attention must be paid when maintaining the
starter. Check the condition of cables on a regular
basis and if any damage is detected, have the same
repaired by an authorised technician.
20- Check there are no damaged parts. Before using this
starter, carefully check all seemingly damaged parts
and assess whether or not they can operate correctly.
Check that the cables are securely fastened to the
starter. Remember that only qualied technicians are
allowed to repair or replace damaged parts.
INSTALLATION
ASSEMBLY (Fig. C)
Unpack the starter and assemble the separate parts
included in the package.
OPERATING PROCEDURES
WARNING:Electricshocksmaycause
injury or death. Do not touch bare
electrical conductors.
The starter is designed for use on vehicles or boats. It
does not need another vehicle or a 230V AC power
supply socket.
This starter can also be used as a portable, 12V DC,
power supply for remote areas or in emergencies.
Using the starter to start a vehicle
WARNING: follow these instructions
meticulously, and always in the order given
below!
- Check that the starter clamps are NOT powered up: the
mounting socket (Fig. A-1) must be disconnected.
- Make sure that the vehicle or boat to be started is
switched off - switch or ignition key in the OFF position.
- First connect the red clamp to the positive terminal on
the vehicle battery.
- Then connect the black clamp to a non-movable metal
part of the engine; do not connect the clamp to the
negative terminal on the battery.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telwin PRO START 1712 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telwin PRO START 1712 in the language / languages: All languages as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telwin PRO START 1712

Telwin PRO START 1712 User Manual - All languages - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info