627186

Telwin LINEAR 530 HD Manual

5
Zoom out
Zoom in
Previous page
1/84
Next page
- 5 -
GB
INSTRUCTION MANUAL
WARNING! BEFORE USING THE WELDING MACHINE READ
THE INSTRUCTION MANUAL CAREFULLY.
ARC WELDING MACHINES FOR COATED ELECTRODES (MMA)
FOR INDUSTRIAL AND PROFESSIONAL USE.
Note: In the following text the term “welding machine” will be used.
1.GENERALSAFETYCONSIDERATIONSFORARCWELDING
The operator should be properly trained to use the welding
machine safely and should be informed about the risks related
to arc welding procedures, the associated protection measures
and emergency procedures.
(Please refer to the applicable standard “EN 60974-9: Arc
welding equipment. Part 9: Installation and Use).
- Avoid direct contact with the welding circuit: the no-load
voltagesuppliedbythe welding machine can bedangerous
under certain circumstances.
- When the welding cables are being connected or checks
and repairs are carried out the welding machine should be
switched off and disconnected from the power supply outlet.
- Make the electrical connections and installation according to
the safety rules and legislation in force.
- The welding machine should be connected only and
exclusivelytoapowersourcewiththeneutralleadconnected
to earth.
- Make sure that the power supply plug is correctly connected
to the earth protection outlet.
- Do not use the welding machine in damp or wet places and do
not weld in the rain.
- Do not use cables with worn insulation or loose connections.
- Do not weld on containers or piping that contains or has
containedammableliquidorgaseousproducts.
- Donotoperateonmaterialscleanedwithchlorinatedsolvents
or near such substances.
- Do not weld on containers under pressure.
- Removeallammablematerials(e.g.wood,paper,ragsetc.)
from the working area.
- Provide adequate ventilation or facilities for the removal of
welding fumes near the arc; a systematic approach is needed
inevaluatingtheexposurelimitsfortheweldingfumes,which
will depend on their composition, concentration and the
length of exposure itself.
- Use adequate electrical insulation with regard to the electrode,
the work piece and any (accessible) earthed metal parts in the
vicinity.
This is normally achieved by wearing gloves, shoes, head
coverings and clothing designed for this purpose and by
using insulating platforms or mats.
- Alwaysprotectyoureyeswiththerelativelters,whichmust
comply with UNI EN 169 or UNI EN 379, mounted on masks or
use helmets that comply with UNI EN 175.
Use the relative re-resistant clothing (compliant with UNI
EN11611)andweldinggloves(compliantwithUNIEN12477)
without exposing the skin to the ultraviolet and infrared
rays produced by the arc; the protection must extend to
other people who are near the arc by way of screens or non-
reectivesheets.
- Noise: If the daily personal noise exposure (LEPd) is equal
toorhigher than 85dB(A)because of particularlyintensive
weldingoperations,suitablepersonalprotectivemeansmust
be used (Tab. 1).
- The ow of the welding current generates electromagnetic
elds(EMF)aroundtheweldingcircuit.
Electromagnetic elds can interfere with certain medical
equipment (e.g. Pace-makers, respiratory equipment, metallic
prostheses etc.).
Adequate protective measures must be adopted for persons
with these types of medical apparatus. For example, they must
be forbidden access to the area in which welding machines are
in operation.
This welding machine conforms to technical product standards
forexclusiveuseinanindustrialenvironmentforprofessional
purposes. It does not assure compliance with the basic limits
relative to human exposure to electromagnetic elds in the
domesticenvironment.
The operator must adopt the following procedures in order to
reduceexposuretoelectromagneticelds:
- Fasten the two welding cables as close together as possible.
- Keep head and trunk as far away as possible from the welding
circuit.
- Neverwindweldingcablesaroundthebody.
- Avoidweldingwiththebodywithintheweldingcircuit.Keep
both cables on the same side of the body.
- Connect the welding current return cable to the piece being
welded, as close as possible to the welding joint.
- Do not weld while close to, sitting on or leaning against the
welding machine (keep at least 50 cm away from it).
- Donotleaveobjectsinferromagneticmaterialinproximityof
the welding circuit.
- Minimum distance d = 20 cm (Fig. L).
- Class A equipment:
This welding machine conforms to technical product standards
for exclusive use in an industrial environment and for
professional purposes. It does not assure compliance with
electromagnetic compatibility in domestic dwellings and in
premises directly connected to a low-voltage power supply
system feeding buildings for domestic use.
EXTRA PRECAUTIONS
- WELDINGOPERATIONS:
- Inenvironmentswithincreasedriskofelectricshock.
- Inconnedspaces.
- Inthepresenceofammableorexplosivematerials.
MUSTBEevaluatedinadvancebyan“Expertsupervisor”and
must always be carried out in the presence of other people
trainedtointerveneinemergencies.
AllprotectivetechnicalmeasuresMUSTbetakenasprovided
in 7.10; A.8; A.10 of the applicable standard EN 60974-9: Arc
weldingequipment.Part9:InstallationandUse”.
-The operator MUST NOT BE ALLOWED to weld in raised
positions unless safety platforms are used.
-VOLTAGEBETWEENELECTRODEHOLDERSORTORCHES:
working with more than one welding machine on a single piece
or on pieces that are connected electrically may generate a
dangerous accumulation of no-load voltage between two
differentelectrodeholdersortorches,thevalueofwhichmay
reach double the allowed limit.
An expert coordinator must be designated to measuring
the apparatus to determine if any risks subsist and suitable
protection measures can be adopted, as foreseen by section
7.9 of the applicable standard “EN 60974-9: Arc welding
equipment.Part9:InstallationandUse”.
RESIDUAL RISKS
-OVERTURNING:positiontheweldingmachineonahorizontal
surface that is able to support the weight: otherwise (e.g.
inclinedorunevenoorsetc.)thereisdangerofoverturning.
-IMPROPERUSE:itishazardoustousetheweldingmachine
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telwin LINEAR 530 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telwin LINEAR 530 HD in the language / languages: All languages as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info