578062
11
Zoom out
Zoom in
Previous page
1/12
Next page
11
Pressure Pro gebruiksaanwijzing Tel Sell
Problemen oplossen:
PROBLEEM
MOGELIJKE OORZAKEN
OPLOSSINGEN
De deksel sluit niet
goed
De sluitring is niet correct geplaatst
Zet de sluitring opnieuw op zijn plaats
De vlotter zit vast aan het duwstaafje
Duw het staafje met de hand naar
beneden totdat hij soepel beweegt
Deksel gaat niet
open
De vlotter staat nog steeds hoog.
Druk de vlotter omlaag
Lucht lekt weg bij
dekselrand
De sluitring is niet correct geplaatst
Zet de sluitring opnieuw op zijn plaats
De stalen ring is vervormd
Maak de ring weer vlak met uw rand
Er zitten voedselresten op sluitring of
sluitring is versleten
Maak sluitring schoon of vervang hem
Deksel is niet goed gesloten
Sluit de deksel opnieuw en volg de
instructies
Lucht lekt weg van
het drukventiel
Voedselresten op de sluitring of op
drukventiel, of de ring is versleten
Maak sluitring van het drukventiel
schoon of vervang hem
De vlotteropening is verstopt
waardoor de vlotter niet omhoog kan
komen
Maak de vlotteropening schoon zodat
de vlotter vrij kan bewegen
Vlotter komt niet
omhoog
Te weinig water of voedsel
Controleer de gebruiksaanwijzing voor
de juiste hoeveelheid
Lucht ontsnapt van de rand van de
deksel of van het drukventiel
Controleer of sluitring en stalen ring
correct zijn geplaatst en dat het
drukventiel in de Seal stand staat.
E01
Temperatuursensor werkt niet
Vervang de temperatuursensor
E02
Temperatuursensor maakt
kortsluiting
Vervang de voedingseenheid
Toont E03 wanneer
de stekker in het
stopcontact wordt
gestoken
De temperatuur onder in de
binnenpan is te hoog,
voedingseenheid is doorgebrand
Vervang de voedingseenheid
Toont E03 tijdens
de bereiding
Het voedsel verbrandt of plakt aan de
bodem van de pan waardoor de hitte
niet overgebracht kan worden
Maak het binnenwerk goed schoon,
niet hard schuren om de pan niet te
beschadigen.
E04 verschijnt
wanneer de stekker
in het stopcontact
wordt gestoken
De stekker zit niet goed in het
stopcontact
Steek de stekkers opnieuw in apparaat
en stopcontact voor een goed contact
De rode draad onderin is los geraakt
Maak de onderkant van de Pressure
Pro open en verbind de rode draad
opnieuw
De drukschakelaar werkt niet
Laat Pressure Pro repareren door een
erkende vakman
E04 verschijnt
tijdens het
bereidingsproces
De signaalschakeling is losgeraakt
Maak de onderzijde van Pressure Pro
open, reinig het contactpunt van
drukschakelaar met alcohol en een
wattenstaafje, of laat dit doen door een
erkend vakman.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telsell Pressure Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telsell Pressure Pro in the language / languages: Dutch as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info