634948
10
Zoom out
Zoom in
Previous page
1/32
Next page
10
5.4 Antenne
Der DIGIBIT R 1 verfügt über 4 Tunereingänge, welche sowohl in Kombination mit
einem Quad-LNB als auch mit einem Quatro-LNB oder Unicable LNB verwendet wer-
den können. Werkseitig ist der DIGIBIT für die Verwendung mit einem Quad-LNB
voreingestellt. Die Antenneneinstellungen können über das Webinterface unter dem
Punkt „Antenne“ geändert werden.
Single oder Twin LNB: Der Betrieb mit einem Single oder Twin LNB ist möglich (An-
schluss an Tuner 1 bzw. Tuner 1&2), die Anzahl der Clients entspricht dann 1 bzw. 2.
Bitte setzen Sie in diesem Fall den LNB-Typ auf Quad.
Quad-LNB: Schließen Sie den DIGIBIT R1 direkt an ein Quad-LNB (Quatro-Switch
LNB) oder an die Ausgänge eines Multischalters (1 bis 4 Tuner) an.
Quattro-LNB: Das LNB muss, wie beschrieben, an der Rückseite des DIGIBIT ange-
schlossen werden, die Reihenfolge der Ebenen ist wie folgt: Tuner 1 = H/H, Tuner 2 =
V/H, Tuner 3 = H/L, Tuner 4 = V/L.
Unicable LNB: Für den Betrieb an einer Unicable Anlage nach DIN EN 90494 oder
DIN EN 50607 Hier muss lediglich ein Kabel an den DIGIBIT angeschlossen werden,
verwendet wird hierzu der erste Tuner (linke Buchse auf der Rückseite, siehe Abbil-
dung). Es wird Unicable nach DIN EN 50494 oder Unicable II nach DIN EN 50607
unterstützt. Im Web Interface müssen die Frequenzen für Unicable (Sat-CR)
entsprechend Ihrer Anlage eingetragen werden.
LNB Eingangswahl
Im Bereich LNB Eingangswahl kann die automatische LNB Eingangswahl abgeschaltet
werden. In der Werkseinstellung ist die automatische Eingangswahl aktiviert.
Automatische Eingangswahl aktiv:
In dieser Einstellung können maximal 4 Endgeräte mit jeweils einem frei wählbaren
Programm versorgt werden. Sobald sich ein Endgerät am Digibit R 1 angemeldet hat,
wird diesem Clienten ein Tuner zugewiesen. Alle 4 Client-Geräte können jedes
beliebige Programm empfangen, da jedem Gerät ein fester Tuner zugewiesen ist.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telestar DIGIBIT R1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telestar DIGIBIT R1 in the language / languages: German as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info