486599
3
Zoom out
Zoom in
Previous page
1/8
Next page
NOTE: Old batteries may swell and leak. To avoid damage to your instrument,
remove the batteries when the unit is to be stored for long periods of
time or if the batteries become exhausted.
NOTE: To use your set on battery power, you MUST remove the AC cord from
both the wall outlet and the back of the set.
AC OPERATION
Plug the AC power cord into AC socket (37), and the other end of the cord into
the standard household outlet. Please make sure the MAIN POWER SWITCH (53)
must be switched to ON position, and then press POWER BUTTON (4) or (46) to
turn on the unit.
NOTE : For dual voltage version, make sure that the AC Voltage Selector (38) is
switched to your local voltage (optional).
NOTE : Switch the MAIN POWER SWITCH (53) to OFF position when the unit is
not to be used for a long period of time.
TO PLAY THE RADIO
Press the Radio Button (11) OR (47) to set the radio on (the Radio Indicator
(10) will illuminate).
Select desired wave band with the Band button (18) OR (48).
Tune to desired station by press CD FORWARD/BACKWARD
SKIP/SEARCH/RADIO TUNING UP/DOWN BUTTONS (21) OR (44)/(52).
Each time the button is pressed, the frequency changes.
To search for a station quickly, keep the CD FORWARD/BACKWARD
SKIP/SEARCH/RADIO TUNING UP/DOWN BUTTONS (21) OR (44)/(52) until
the station starts to change rapidly, then release the button and it will stop at
the next strong station.
The built-in AM(MW) antenna and the antenna rod are directional. When
receiving FM broadcast, extend the Telescopic Antenna (32) in full length. The
strongest reception can be achieved by rotating the set for AM(MW) or
Telescopic Antenna for FM.
Adjust the VOLUME UP/DOWN CONTROL (16) OR (51) to your listening
preference.
To turn off the radio, press power on/off button.
PRESETTING STATIONS
UP TO 10 AM(MW) AND 10 FM STATIONS CAN BE STORED INTO THE
PRESET MEMORIES.
Press the Radio Button (11) OR (47) first, the Radio indicator (10) will
illuminate.
Press the Band Switch to select AM(MW) or FM band, and press the Tuning
Down or Up Button to select a station.
Press the Program Button, "
" will be flashing in the Display.
While "
" is flashing, press the Radio Preset Button (1) (once or
repeatedly) to choose a memory location.
Press the Program Button again to confirm. The station now broadcasting is
stored into that preset memory.
Repeat the above steps 2 to 5 to store other 9 stations into memory.
Each memory location (01-10) can store 2 stations, one for AM(MW), the other for
FM.
TO LISTEN TO PRESET MEMORY STATIONS (after you have programmed them)
Press the Radio Button (11) OR (47) to set the radio ON.
Press the Band Button (18) OR (48) to select your desired wave band.
Press the Radio Preset Button (1) to select the memory location (01-10). You
will receive the station you stored into that preset memory. Pressing the button
several times will give you the different memory locations 1-10 where your
desired stations were stored into the preset memories 1 to 10 (Example:
Pressing the button 3 times will give you Preset Number 3, pressing the button
4 times will give you Preset Number 4). Word "
“ and Preset Number
will be shown in the Display.
To shut off the radio, press the Power On/Off Button (4) OR (46) again.
CASSETTE OPERATION
FAST FORWARD (25) AND REWIND (24)
For fast forward or rewinding of the tape, press the Cassette Fast Forward
Button or Cassette Rewind Button.
PAUSE (28)
The Cassette Pause Button is used to edit commercials or in case recording is
temporarily interrupted. Since the deck motor is still running while the pause
key is pressed, this pause feature should be used for a short time only.
AUTOMATIC STOP
This instrument has a built-in automatic stop function and the tape mechanism
will stop playing or recording and shut off when it reaches the end of the tape.
MANUAL STOP (27)
The tape player can be stopped manually by pressing the Cassette Stop/Eject
Button (27).
CASSETTES
CASSETTE TAPE SELECTION
Low quality tapes tend to break and stretch and a broken tape can easily become
entangled in the drive mechanism, causing major damage. Stretched tapes will
run at uneven speeds and will distort anything recorded on them.
Use only quality brands of tapes.
Use of C-120 (120 minutes) cassette is not recommended. The extreme
thinness of this tape may result in breakage or other failures.
This unit is not designed for CrO2, Fe-Cr or METAL tape use. Therefore, be
sure to use name brand normal cassette tapes.
05
04
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telefunken TCD62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken TCD62 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info