723455
5
Zoom out
Zoom in
Previous page
1/9
Next page
5
EN
Adjust to the desired temperature with the + and - keys on the digital screen.
Press the Start button again to start preheating.
A bar graph will appear, showing you the progress towards your target temperature.
The appliance will beep when the temperature has been reached.
The preheating phase is now completed.
3. Open the appliance drawer and place the ingredients in the basket.
Note: do not fill the basket right up to the top, and do not exceed the quantities given in
the table (see “Cooking guide” section), as this could affect the final result.
4. Close the drawer.
Never use the pan without the basket inside.
Note: 5 consecutive beeps means the pan is not positioned correctly in the appliance.
Warning: allow the pan to cool before handling. Always hold the basket by the handle.
5. To begin cooking, you can select between the automatic cooking mode or choose the
settings yourself.
b. If choosing manual settings:
Adjust the temperature with the + and - keys on the digital screen. The thermostat varies
from 60-200°C.
Then set the desired cooking time by pressing the button and adjusting the time with
the + and - on-screen keys. The timer can be set for between 0 and 60 minutes.
Press the Start button to begin cooking with the selected temperature and time settings.
Cooking starts. The selected temperature and remaining cooking time will alternate on the
on-screen display.
a. If choosing automatic cooking mode:
Press to display the cooking mode number.
Then press the + and - keys or button on the screen to select the desired cooking mode
(these modes are described in detail in the “Cooking guide” section).
Confirm the cooking mode by pressing the Start button. This will launch the cooking process.
Cooking starts. The selected temperature and remaining cooking time will alternate on the
on-screen display.
6. Some ingredients need to be stirred halfway through cooking (see “Cooking guide”
section). To do this, open the appliance drawer, lift the basket by its handle and shake. Only
use wooden or plastic utensils to turn food to avoid damaging the non-stick coating of the
basket. Put the basket back in place inside the pan and close the drawer. Then press the
Start button again to restart cooking.
7. Once the cooking time has elapsed, the appliance will make a sound and switch off.
Remove the basket from the appliance and place it on a heat resistant surface.
8. Empty the basket into a bowl or plate.
Tip: to remove bulky or fragile ingredients, use a pair of tongs.
9. The pan and ingredients will be hot at the end of cooking. Depending on the type of
ingredients placed in the Fry Delight XL, steam may escape from the pan.
10. When a basket of food is cooked, you can immediately start a new cooking process in your
appliance.
Note: after 15 minutes of inactivity, the appliance will switch to Sleep mode. Press the
button to turn it back on again.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal FX1050 - Fry Delight XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal FX1050 - Fry Delight XL in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info