609510
2
Zoom out
Zoom in
Previous page
1/2
Next page
TecMate International TecMate North America
Ambachtenlaan 6,
B-3300 Tienen, Belgium
1100 Invicta Drive #22,
Oakville, ON L6H 2K9, Canada
www.tecmate.com
How it works
1. OptiMate 1 charges the battery with 0.9A current.
2. Starts at 8V, then delivers up to 0.9A bulk charge up to 14.3V, followed by maintenance charge mode at 13.4-13.5V, with
interactive stand-by.
The voltage rises gradually as the resistance increases, until a safe limit has been reached. The circuit then switches into a float
charge mode with voltage limited at 13.6V, to bring the battery gently to full charge & keep it fully charged when not in active use,
as recommended by manufacturers of lead-acid batteries, without risk of over-charging.
3. Electronic multi stage controller for precise voltage and current delivery.
4. Inter-active stand by charging when the battery has been used or needs charge, OptiMate 1 automatically tops off the
battery, then returns to maintenance mode.
5. 100 % Safe
An auto-resetting thermal fuse switches off the charger’s output circuit if the internal temperature for any reason exceeds a safe
limit, to protect the charger from burn-out. The yellow « charge » LED goes out until the temperature has fallen to a safe level, then
the output circuit automatically switches back on and the yellow LED switches back on.
6. Incorrect battery connection
If the battery connections are incorrect (wrong polarity), neither the yellow « charge » LED, nor the green « maintain » LED will
indicate.
7. OptiMate 1 has short circuit, over current and reverse polarity protection.
Technical Specifi cations
Recommended for AGM/MF, Standard, GEL
and spiral cell batteries
Recharging: from 2Ah to 50Ah capacity
Long term maintenance: up to 70Ah
Program control fully automatic
Input current max. 0.30A @ 110V – 120V 50/60Hz
Reverse drain current less than 0.5mA
Output current (bulk charge) 0.9A
Charge time limit Safe to leave connectec for seasonal maintenance
Maintain / test cycles Keeps battery at 100% charged when not in use
Size 4 x 2 ½ x 3 inches (100 x 63 x 76mm)
Weight (packaging) 1,41lbs (1.8lbs) – 0.64kg (0.85 kg)
Output cable length 12ft / 3.6m
Included accessories SAE-71 fused eyelet set, weather protected
SAE-74 clamps set for bench charging
Operation temperature range From –20ºC / –4F to 40ºC/104F
Warranty 3 years
copyright © 2010 Tecmate International - TM085-PL1-110913_EN
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tecmate Optimate 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tecmate Optimate 1 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info