541942
5
Zoom out
Zoom in
Previous page
1/9
Next page
When is mostly shown with occasional , it is very likely that the DCF time can
be received in this location.
When is only shown, it is very likely that the DCF time can be received in this
location.
RCC Zone offset
This clock is equipped with radio controlled time adjustment. The user will need to work
out the time zone signal they receive at their current location and make (any) adjustment
as required. This function also allows for daylight saving adjustment. Contact your local
weather bureaus or authorities for more information.
Press -/ RCC button (4) once for +1 time zone.
Press -/ RCC button (4) once again for +2 time zone.
Press -/ RCC button (4) once again for -1 time zone.
Press -/ RCC button (4) once again for same time zone.
To set time manually:
Hold down the MODE/ SET button (3) for approximately 3 seconds until the display is
flashing.
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
toggle between AM / PM and 24-hour clock
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
change the hour setting.
Press MODE/ SET button (3) again. Press Press -/ RCC button (4) or +/ C/ F button (5)
to change the minute setting.
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
change the year setting.
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
change the month/date and date/month setting.
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
change the month setting.
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
change the date setting.
Press MODE/ SET button (3) again. Press -/ RCC button (4) or +/ C/ F button (5) to
change the weekday language setting.
ENG for English; GE for German; IT for Italian; FR for French; NE for Dutch; ES for
Spanish; DA for Danish
Press MODE/ SET button (3) again to confirm settings. Display will no longer flash.
To see alarm time:
Press MODE/ SET button (3) once and alarm time 1 will be shown as indicated by AL.
Press MODE/ SET button (3) again and the current time will be shown.
To set alarm time:
Press MODE/ SET button (3) once and alarm time will be shown as indicated by AL.
Press and hold MODE/ SET button (3) for approximately 3 seconds until the digits flash.
Press -/ RCC button (4) or +/ C/ F button (5) to change the hour setting.
Press MODE/ SET button (3) again.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS6650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS6650 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Techno line WS6650

Techno line WS6650 User Manual - English, German, Dutch, French, Italian, Polish, Spanish - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info