542213
2
Zoom out
Zoom in
Previous page
1/3
Next page
WS 8006 Manual
` Press and hold down the “ALARM” button for two seconds until alarm time and the flashing icon are
displayed.
` The Hour display of the Alarm time starts to flash. Use the “” and ““buttons to set the required hour.
Press “ALARM” button to confirm your setting
` The Minute display of the Alarm time starts to flash,Use the “” and “buttons to set the required
minute. Press “ALARM” button to confirm your setting and to end the setting procedure.
` To activate or deactivate the daily alarms, in the alarm mode, press “UP” button to switch alarm
function.
F.Y.I.:
` After 7 seconds without pressing any button the clock switches automatically from setting mode to
Normal clock mode.
` The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the
alarm will be repeated automatically after 24 hours.
` Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm
signal is heard.
Automatic SNOOZE function:
` To activate the automatic snooze function: While the alarm is sounding, press the “SNOOZE” button to
activate the snooze function. When the snooze function is activated, the Alarm symbol appears in the
display.
` This operation moves the alarm back by 5 minutes and the alarm will restart at this time.
` The snooze function can be interrupted by pressing any button and can be repeated up to seven times.
°C/°F temperature display:
` The temperature is displayed either in °C or °F. Briefly pressing the “ “button allows you to switch
between the individual models.
Reception of the Radio signal:
` The clock automatically starts the DCF signal search after 7 minutes of any restart or changing of new
fresh batteries. The radio mast icon starts to flash.
` At 1:00 am, the clock automatically carries out the synchronization procedure with the DCF signal to
correct any deviations to the exact time. If this synchronization attempt is unsuccessful (the radio mast
icon disappears from the display), the system will automatically attempt another synchronization at the
next full one hour. This procedure is repeated automatically up to total 5 times.
` To start manual DCF signal reception, press the “WAVE“ button. If no signals received within 7 minutes,
then the DCF signal search stops (the radio mast icon disappears) and start again at the next full one
hour.
` During RC receptionto stop searching radio signal, Press and hold the “WAVE” button for two
seconds.
F.Y.I.:
` A flashing radio mast icon indicates that the DCF signal reception has started
` A continuously displayed radio mast icon indicates that the DCF signal was received successfully
` We recommend a minimum distance of 2.5 meters to all sources of interference, such as televisions or
computer monitors
` Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme
circumstances, place the system close to the window.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS 8006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS 8006 in the language / languages: English as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Techno line WS 8006

Techno line WS 8006 User Manual - German - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info