541945
4
Zoom out
Zoom in
Previous page
1/8
Next page
Note: It is only possible to measure the barometric pressure trend properly when
the unit remains at the same altitude. When moving around at different
altitudes within a short period of time, the air pressure and the barometric
pressure will change. The pressure trend will only be correct and regulate
the has remain at a constant altitude for 24 hours or more.
To recall recorded pressure history reading
The barometric pressure reading is recorded at an hourly interval and can be recalled
and displayed up to previous 12 hours.
Press HISTORY button (5) repeatedly to view pressure recorded in the past hours. -1
HR indicates the pressure of the previous hour. The pressure reading history will appear
for 20 seconds before the current pressure returns.
RCC Synchronization:
Where ever available, this clock will automatically synchronize with the radio control
towers at the following time: 02:05, 03:05, 04:05, 05:05.
User may also manually synchronize the clock by following the instructions below.
Press and hold down the -/ RCC button (3) for approximately 3 seconds until is
flashing.
When this signal is flashing, the clock is attempting to synchronize with the radio control.
will flash when a strong signal is received and the clock will synchronize with the
radio control. This process can take up to 7 minutes. will stop flashing and will be
displayed once the signal is received and in synchronization.
will not be displayed if the clock is not able to synchronize within this period of
time. User may manually synchronize again at a later time or the clock will automatically
attempts to synchronize at the above mentioned time.
When the clock is attempting to synchronize, press down the -/ RCC button (3) to cancel
RCC synchronization.
Please note all other clock/ weather station settings seize to function when the clock is in
RCC synchronization mode. Wait until the clock is no longer attempting to synchronize
or it is synchronized to set other clock and weather station function.
If the alarm goes off during synchronization mode, RCC synchronization will seize
immediately. Follow the above instructions again to set synchronization.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS 6850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS 6850 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Techno line WS 6850

Techno line WS 6850 User Manual - English, German - 68 pages

Techno line WS 6850 User Manual - German - 9 pages

Techno line WS 6850 User Manual - Dutch, French, Italian, Polish, Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info