541943
4
Zoom out
Zoom in
Previous page
1/6
Next page
P. 4
During reception, the signal strength may move from 1 bar to 2 bars to 3 bars. This is normal since
the clock is detecting DCF signal and other signals in the air at the same time.Press SET will return
to the time display with icon flashing.
Successful reception or failed reception
icon becomes static on (stop blinking) when reception is successful
icon disappears when reception is failed
Automatic reception and manual reception
Your clock starts automatic reception everyday at 1:00, 2:00, and 3:00. If it fails to receive the DCF
time signal at 3:00, it will start reception at 4:00. If it fails again, it will start reception at 5:00. If it
fails again, it will start automatic reception at 1:00 again in the next day.
For manual reception simply press and hold / WAVE, your clock will gives a short beep and
starts manual reception. Press and hold / WAVE to stop DCF reception.
During RCC reception, all buttons do not function and it does not take temperature and humidity
measurement. The temperature and relative humidity readings will get stable and become more
accurate after your weather station clock is powered up for around 30 minutes.
To cancel DCF reception permanently
Press and hold / WAVE and at the same time for 2 seconds, your clock will give 2 short
beeps and the radio controlled function is permanently disabled.
To resume the radio controlled function, press and hold / WAVE and at the same time for 2
seconds, your clock will give 2 short beeps and will start DCF immediately.
Note: Keep in mind that your outdoor transmitter has a 30-meter open air transmission with no
obstructions. Actual transmission range will vary depending on what is in the path of the signal.
Each obstruction (roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in half.
ZEITEINSTELLUNG
1. Press and hold SET for 2 seconds, hour digits flash. Press / to set hours.
2. Then press SET once again, the minute digits flash. Press / button to set minutes.
3. Then press SET once again, display shows :05 and flash. Press / button to set snooze
duration from 5 minutes to 60 minutes.
4. Press SET to return to normal mode or it will return to normal mode in around 8 seconds if no
further press of any other buttons.
5. Your clock is in 24-hour display format.
ALARMEINSTELLUNG
(default alarm setting is 6:00 AM)
1. Press and hold ALM, the hour digits flash with AL icon flashing. Press / to set your
desired alarm hours.
2. Press ALM once again, the minute digits flash. Press / to set your desired alarm
minutes.
3. Press ALM once to store your alarm setting and return to normal time display, or the clock
will return to normal mode in around 8 seconds if no further press of any other buttons.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS 6815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS 6815 in the language / languages: German as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Techno line WS 6815

Techno line WS 6815 User Manual - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info