542178
2
Zoom out
Zoom in
Previous page
1/5
Next page
QUICK START
1. Slide open the battery cover at the back of your wireless thermometer-clock.
2. Insert 2 x AAA batteries into the battery compartment by observing the correct + / - polarity
signs inside the battery compartment.
3. Replace the battery cover. In few seconds the LCD shows the default time, calendar and the
current indoor temperature and it starts to search for outdoor temperature signal.
4. Then insert 2 x AA batteries into the outdoor sensor. The outdoor temperature will be displayed
with “CH1” shown on the lower line of the LCD. Your Thermometer-clock will be synchronized
with outdoor sensor at Channel 1, the outdoor temperature will be display.
Remarks:
Keep in mind that your outdoor sensor has a 30-meter open air transmission with no obstructions.
Actual transmission range will vary depending on what is in the path of the signal. Each obstruction
(roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in half.
TO SET CALENDAR, 12/24 TIME AND TIME
1. Press and hold SET / ALM SET for 2 seconds, time digits change to year “2008 YR” and flash.
Press
/ to set year.
2. Then press SET / ALM SET once again, month digits flash. Press
/ button to set month.
3. Then press SET / ALM SET once again, date digits flash. Press
/ button to set date.
4. Press SET / ALM SET once again, time digits change “24 Hr”, press
/ to select “12 Hr”
time format or “24 Hr” time format. When “12 Hr” is selected, AM / PM icon will be displayed.
5. Then press SET / ALM SET once again, time digits changes to “00”, press / to select your
time zone.
6. Then press SET / ALM SET once again, time digits “0:00” show up and the hour digits flash.
Press
/ to set the hours.
7. Then press SET / ALM SET once again, minute digits flash. Press
/ button to set the
minutes.
8. Press SET / ALM SET to return to normal mode, or it will return to normal mode in around 7
seconds if no press of any other buttons.
TO SET ALARM TIME
Press SET / ALM SET once, time digits change to alarm time digits “AM 7:00 AL”. Then press and
hold SET / ALM SET for 2 seconds, the hour digits flash. Press
/ to set your desired hours of
alarm time.
Press SET / ALM SET again, alarm minute digits flash. Press
/ to set alarm minutes.
Press SET / ALM SET again, time digits change to “05” and flash. Press
/ to set the snooze
duration from 1 to 20 minutes.
Press SET / ALM SET to return to normal mode, or it will return to normal mode in around 8 seconds if
no further press of any other buttons.
TO TURN ON OR OFF YOUR ALARM
Press SET / ALM SET once to display the alarm time. When alarm time is displayed, press
to turn
on / off the daily alarm. When the alarm function is turned on, the
icon appears between the hour
and minute digits.
TO USE SNOOZE ALARM
When time reaches your set alarm time, your clock will give beep sound to wake you up. The
icon will flash.
P.2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS 6720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS 6720 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Techno line WS 6720

Techno line WS 6720 User Manual - German - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info