541939
3
Zoom out
Zoom in
Previous page
1/6
Next page
Press “
CHANNEL”
button (3) or “
C/°F / RCC”
button (4) to change the AM/PM or
12-hour clock setting.
Press “MODE” button (1) again. Press “ CHANNEL” button (3) or “C/°F / RCC”
button (4) to change the TIME ZONE setting.
Press “MODE” button (1) again. Press “ CHANNEL” button (3) or “C/°F / RCC”
button (4) to change the hour setting.
Press “MODE” button (1) again. Press “
CHANNEL”
button (3) or “
C/°F / RCC”
button (4) to change the minute setting.
Press “MODE” button (1) again to confirm settings. Display will no longer flash.
To set calendar:
Press the “MODE” button (1) until the calendar is displayed.
Hold down the “MODE” button (1) for approximately 3 seconds until the display is
flashing.
Press “MODE” button (1) again. Press “ CHANNEL” button (3) or “C/°F / RCC”
button (4) to change the year setting.
Press “MODE” button (1) again. Press “
CHANNEL”
button (3) or “
C/°F / RCC”
button (4) to change between the date/month and month/date setting.
Press “MODE” button (1) again. Press “ CHANNEL” button (3) or “C/°F / RCC”
button (4) to change the month setting.
Press “MODE” button (1) again. Press “ CHANNEL” button (3) or “C/°F / RCC”
button (4) to change the date setting.
Press “MODE” button (1) again to confirm settings. Display will no longer flash.
To set alarm time:
Press the “MODE” button (1) until the alarm is displayed. “AL” will be shown.
Hold down the “MODE” button (1) for approximately 3 seconds until the display is
flashing.
Press “ CHANNEL” button (3) or “C/°F / RCC” button (4) to change the hour
setting.
Press “MODE” button (1) again.
Press “ CHANNEL” button (3) or “C/°F / RCC” button (4) to change the minute
setting.
Press “MODE” button (1) again.
Press “ CHANNEL” button (3) or “C/°F / RCC” button (4) to change the duration of
the snooze time (from 1 minute to 20 minutes).
Press “MODE” button (1) again to complete.
When Alarm time is shown, press “
CHANNEL”
button (3) to turn on and off the alarm.
will be shown when the alarm is on.
The alarm will sound for 120 seconds when the preset alarm time is reached. Hit any
button on the back of the clock to deactivate the alarm.
Hit the “SNOOZE / LIGHT” button (5) when the alarm is on to enter snooze mode.
will flash when the clock is it snooze mode. The alarm will sound again after the
preset snooze time has been reached. Hit any button on the back of the clock to
deactivate the alarm.
REMOTE TEMPERATURE SENSOR
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line KL4912 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line KL4912 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info