6
Operation
Operation/
standby
indicator
VOLUME/
FINE CENTER
CONTROL
VOLUME/
FINE CENTER
CONTROL
Standby/on switch (
I )
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
Operation/standby indicator
The indicator lights green when the unit is turned on.
When connected to SC-HDA710
When this unit is switched on ( ) and SC-HDA710 is switched to
standby, the indicator lights red to indicate this unit is in standby
mode.
When connected to SC-HDA710
¡This unit switches to standby mode when you switch SC-HDA710
to standby mode.
¡[VOLUME/FINE CENTER CONTROL] allows you to make fine
adjustments to the volume of the center speaker to suit the type
of audio you are playing.
¡Use SC-HDA710 to adjust the volume and delay time for the
speakers.
¡Set the speaker mode to “Small
”
.
When connected to equipment other than SC-HDA710.
¡ [VOLUME/FINE CENTER CONTROL] is used to adjust the
volume of all three speakers.
¡Change the 5.1-channel surround sound speaker settings on the
other unit so the speaker mode for these speakers is “Small”.
1 Turn [VOLUME/FINE
CENTER CONTROL]
to the center
position.
2 Press [
I ]
to turn
on the unit.
3 Start play on
SC-HDA710.
4 Adjust the volume of
the center speaker.
I
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and-water solution or a weak detergent solution.
¡ Never use alcohol, paint thinner or benzine to clean this unit.
¡ Before using chemically treated cloth, read the instructions that came with the cloth carefully.
Maintenance
