608360

Technics SCEN37 Manual

6
Zoom out
Zoom in
Previous page
1/8
Next page
g AMPLIFIER SECTION
RMS OUTPUT POWER both channel driven
simultaneously
10 % total harmonic distortion (THD)
1 kHz 3.0 W per channel
Output impedance
HEADPHONE 16 Ω to 32 Ω
MUSIC PORT 14 kΩ
DC IN Jack
Terminal DC 14 V
Phone Jack
Terminal 3.5 mm stereo
Music Port Jack
Terminal 3.5 mm stereo
Option Port Version 1
g TUNER SECTION
Frequency range
FM 87.50 MHz to 108.00 MHz (50 kHz)
AM 522 kHz to 1629 kHz (9 kHz)
520 kHz to 1630 kHz (10 kHz)
g CD SECTION
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3
Sampling frequency
CD 44.1 kHz
MP3 32 kHz, 44.1 kHz, 48 kHz
Bit rate
MP3 32 kbps to 384 kbps
Decoding 16/20/24 bit linear
Pick up
Wavelength 785 nm
Laser power CLASS 1
(For Norge)
Bølgelengde 785 nm
Laserstyrke Ingen farlig stråling sendes ut
(med sikkerhets-beskyttelse)
Audio Output (Disc)
Number of channels 2 channel
Frequency response 20 Hz to 20 kHz (+1, -2 dB)
Wow and flutter
Below measurement limit
Digital filter 8
D/A converter MASH (1 bit DAC)
g SPEAKER SECTION
Type 1 Way, 1 Speaker system
Speaker Unit(s)
Full Range Speaker 8 cm cone type 6 Ω
Impedance 6 Ω
Input power 6 W (MAX)
Dimensions (W x H x D)
121 mm x 236 mm x 146 mm
g GENERAL
Power supply AC 230 to 240 V, 50 Hz
Power consumption 32 W
Dimensions (W x H x D)
220 mm x 236 mm x 146 mm
Mass
With speakers 3.57 kg
Without speakers 1.27 kg
Operating temperature range +5 °C to +35 °C
Operating humidity range
5
% to 90 % RH (no condensation)
Power consumption in standby mode:2.0 W (approx.)
Notes:
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Specifications
6 7
Sleep timer
The SLEEP timer can turn the unit off after a set time.
Press [SLEEP] to turn the SLEEP function ON/OFF.
Each time you press the button:
30 MIN 60 MIN 90 MIN 120 MIN
OFF (Canceled)
g To check the remaining time
Press [SLEEP] once
The play timer and sleep timer can be used together. The sleep timer always has
priority. Be sure not to overlap timer settings.
•
Sound quality
You can choose one of four types of sound quality.
Press [PRESET EQ] to select the sound quality.
Each time you press the button:
HEAVY CLEAR SOFT
(Adds punch to rock) (Clarifies higher sounds) (For background music)
EQ OFF (Canceled) VOCAL (Adds gloss to vocals)
•
Live Virtualizer
You can create a three-dimensional sound field when listening to stereo sound.
Press [SURROUND] to turn the Live Virtualizer ON/OFF.
The actual effect depends on the source played.
Play timer
You can set the timer to come on at a certain time to wake you up.
Preparation:
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio, OPTION or music port
source, and set the volume.
Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK zPLAY Original display
Within 5 seconds, press [2/u] or [1/i] to set the starting time.
Press [CLOCK/TIMER] to confirm.
Repeat steps 2 and 3 to set the finishing time.
To activate the timer
Press [zPLAY] to turn on the timer.
Press [^] to turn off the unit.
To Action
Change the settings Repeat steps 1 to 4 and 6.
Change the source of volume
Press [zPLAY] to clear zPLAY indicator
from the display.
Make changes to the source or volume.
Perform steps 5 and 6.
Check the settings (when the
unit is on or in standby mode)
Press [CLOCK/TIMER] repeatedly to select
zPLAY.
Cancel
Press [zPLAY] to clear the timer
indicator from the display.
The timer will start at the preset time, with the volume increasing gradually to the
preset level.
The timer comes on at the set time every day if the timer is on.
The unit must be in the standby mode for the timer to function.
If you turn the unit off and on again while the timer is functioning, the finish time
setting will not be activated.
When MUSIC PORT or OPTION port is selected as the source when the timer
comes on, the system turns on and engages MUSIC PORT or OPTION port as
the source. If you wish to playback from the portable audio equipment, activate
the equipment’s play mode and increase the volume. (See the portable audio
equipment’s instruction manual.)
•
•
•
•
•
Timers and others
EQ
➡
Page 2 for the position of remote control buttons.
Note
Note
Note
Setting the time
This is a 24-hour clock.
Press [CLOCK/TIMER] to set the clock.
Press [2/u] or [1/i] to select the time within 5 seconds.
(Press and hold to change the time faster.)
Press [CLOCK/TIMER] again.
g To display the clock when the unit is on
Press [CLOCK/TIMER]
g To check the time when the unit is off
Press [CLOCK/TIMER]
The clock is accurate to within ±60 seconds a month. Readjust if necessary.
Set again after disconnecting the AC mains lead or power failure.
Note
To clean this unit, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using chemically treated cloth, read the instructions that came with the cloth
carefully.
•
•
Clean the lens regularly to prevent malfunctions. Use a blower to remove dust and a
cotton swab if it is extremely dirty.
Recommended product: Lens cleaner kit (part no. SZZP1038C).
Do not use the lens cleaner of the CD type.
•
•
Care of the CD lens
Maintenance
If the surfaces are dirty
SC-EN35 E,GN,GCS PP.indd 6 22/03/2007 15:51:21
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SCEN37 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SCEN37 in the language / languages: English as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technics SCEN37

Technics SCEN37 User Manual - German - 24 pages

Technics SCEN37 User Manual - Dutch, Danish - 24 pages

Technics SCEN37 User Manual - French, Italian - 24 pages

Technics SCEN37 User Manual - Swedish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info