536236

Technics SA-DA10 Manual

50
Zoom out
Zoom in
Previous page
1/52
Next page
RQT5518
50
Troubleshooting guide
Before requesting service for this unit, check the chart below for a
possible cause of the problem you are experiencing. Some simple
checks or a minor adjustment on your part may eliminate the
problem and restore proper operation.
If you are in doubt about some of the check points, or if the
remedies indicated in the chart do not solve the problem, refer to
the directory of Authorized Service Centers (enclosed with this
unit) to locate a convenient service center, or consult your dealer
for instructions.
Problem Probable cause(s)
Sound is not heard from
the center, surround or
subwoofer speakers.
The presence setting of the speaker has
been incorrectly set to “NONE” or “NO”.
While enjoying the surround sounds
¡Set the type and presence setting of each
speaker correctly.
Hiss is heard during
stereo broadcasts, but not
during monaural ones.
Excessive noise in both
stereo and monaural
broadcasts.
“STEREO” and “TUNED”
indicators flicker.
Stereo broadcasts highly
distorted.
Modulation for the two types is different so
some noise may be heard during stereo
broadcasts.
Antenna location and direction poor.
Station is distant.
Antenna location and direction poor.
Station is distant.
Building or mountain nearby.
¡Reduce the treble.
¡Change the location and direction of the
antenna.
¡Use an outdoor antenna.
¡Use an antenna with more elements.
25
12, 13
13
–
¡Change the location and direction of the
antenna.
¡Use an outdoor antenna.
¡Use an antenna with more elements.
Unusual “beat”sound is
heard.
Low-pitched “hum” is
heard when a station is
tuned.
A continuous or
intermittent hiss is heard.
A television is on nearby.
Adjacent signal is interfering.
AC mains lead is near the antenna wires.
Electronic interference from the AC mains
lead is fed to the speakers.
Interference from other appliances.
¡Separate the two or turn the television off.
¡Reduce the treble.
¡Separate the AC mains lead from the
wires.
¡Use an outdoor antenna.
¡Separate this unit from such appliances.
While listening to AM broadcasts
While listening to FM broadcasts
¡Select “VGCA ON”.
¡Select “VGCA ON”.
The DSP sound mode has been incorrectly
set to “STEREO”.
¡Set to SURROUND mode.
SURROUND and SFC
cannot be selected.
VGCA is ON. ¡Select “VGCA OFF”.
Page(s)
27
12, 13
13
–
–
25
27
–
13
–
17, 18
22
27
Cannot play Dolby Digital
or DTS sources.
The PCM FIX mode may be on.
An SFC mode is on.
SPEAKERS B is on. ¡Turn SPEAKERS B off. 22
¡Turn PCM FIX mode off.
¡Switch to SURROUND or STEREO mode.
21
20
The DTS FIX mode may be on. ¡Turn DTS FIX mode off. 21
An AM broadcast station
cannot be picked up clearly.
Frequency step is set to 10 kHz. ¡Hold down [BAND] for about 3 seconds.
This changes the frequency step to 9 kHz.
28
Suggested remedy
… 50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SA-DA10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SA-DA10 in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technics SA-DA10

Technics SA-DA10 User Manual - English - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info