569606

Technaxx TX18 Manual

1
Zoom out
Zoom in
Previous page
1/3
Next page
CCD Dummy Camera TX-18 * Quick User Guide *
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar “Konformitätserklärung”)
1) Slide the top cover of the camera forward and remove it. The black lid of
the battery compartment is visible.
2) Open the battery compartment lid.
3) Insert 2x AA batteries* (* not included). The red LED starts to flash.
4) Close the battery compartment lid.
5) Slide the top cover of the camera back into position.
6) Fix the camera with the 3 screws** (3 anchor bolts**) at the intended
place (** included). After installation align the camera. Indoor installation is
recommended (Outdoor installation on water sheltered places only!).
7) Stick the warning sign on a good visiable place to draw attention to the
camera (is mandatory!).
8) Optionally, you can drill a small hole in the wall to fit the dummy cable of
the camera into it. Thus, the dummy camera looks even more real.
Hints for Environment Protection: Packages materials are raw materials and can be recycled. Do not disposal old devices into
the domestic waste. Cleaning: Protect the device from contamination and pollution (use a clean drapery). Avoid using rough,
coarse-grained materials/solvents/other aggressive cleaner. Wipe the cleaned device.
Distributor:
Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany
CCD Kamera-Attrappe TX-18 * Schnellanleitung *
Die Konformitätserklärung für dieses Gerät ist unter dem Internet-Link:
www.technaxx.de/ (in Leiste unten “Konformitätserklärung”)
1) Die obere Abdeckung der Kamera nach vorne schieben und abnehmen.
Der schwarze Deckel des Batteriefaches ist sichtbar.
2) Batteriefach-Deckel öffnen.
3) 2x AA Batterien* einlegen (* nicht im Lieferumfang enthalten). Die rote
LED beginnt zu blinken.
4) Batteriefach-Deckel schließen.
5) Die obere Abdeckung der Kamera wieder zurück in Position schieben.
6) Die Kamera mit den 3 Schrauben** (3 Dübel**) am vorgesehenen Platz
befestigen (** im Lieferumfang enthalten). Nach Montage die Kamera
ausrichten. Innenmontage wird empfohlen (Aussenmontage nur an
wassergeschützten Plätzen!).
7) Das Warnzeichen an einem gut sichtbaren Ort aufkleben, um auf die
Kamera hinzuweisen (ist Vorschrift!).
8) Sie können optional ein kleines Loch in die Wand bohren, um das
Attrappen-Kamerakabel dort hineinzustecken. So sieht die Kamera-Attrappe
noch echter aus.
Hinweise zum Umweltschutz: Verpackungen sind recycelbares Rohmaterial. Alte Geräte nicht im Hausmüll entsorgen.
Reinigung: Gerät vor Verschmutzung schützen (mit sauberem Tuch reinigen). Keine rauen, groben Materialien oder
Lösungsmittel oder andere aggressive Reiniger verwenden. Gereinigtes Gerät gründlich abwischen.
Inverkehrbringer:
Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Deutschland
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technaxx TX18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technaxx TX18 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info