795985
3
Zoom out
Zoom in
Previous page
1/13
Next page
3
2. Initiate Easy IP-Cam
The Easy IP-Cam has a built-in WIFI chipset and can directly connect to your home WIFI
network. Therefore, for the first time use the Easy IP-Cam, you need to set up the WIFI
network and assign an available network which can link to the internet for the camera from
the AP (Access Point) Mode.
Install Easy IP-Cam
Insert a MicroSD card in the MicroSD card slot max.32GB.
Insert the AC Plug of the camera to the wall AC outlet and the Easy IP-Cam turns on.
Adjust the camera up or down to the applicable angle.
Note:
1. The Easy IP-Cam has no built-in battery. If you take out the camera from the AC outlet,
the camera will be offline and turns off.
2. All settings have saved in camera even power off. When the power supply restore, the
camera will turn on and reconnect to the set WIFI network automatically.
Access AP Mode
If the Easy IP-Cam was never be used. It will enter the AP Mode directly.
The RED Status LED lights on for about 8 seconds to initiate. After that it flashes slowly for 20 or
more seconds and active the WIFI function.
The Ready LED flashing fast in GREEN when the camera enters the AP Mode.
Note: Press the Reset Button to restore the default setting of camera in AP Mode.
3. Setup Easy IP-Cam
Install Technaxx Easy IP App
Search and find the Technaxx Easy IP App from the Apple Store for iOS or the
Google Play for Android. Then install it in your mobile device. Press the Easy IP
icon to start it.
Add Camera ( )
Press the Add Camera icon to add camera. Find the UID QR Code Label on the
camera body. Use the QR Code Reader to read the UID of camera.
Enter UID Password "888888" and name (customizable) the camera.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technaxx TX-58 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technaxx TX-58 in the language / languages: English as an attachment in your email.

The manual is 0.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technaxx TX-58

Technaxx TX-58 User Manual - German - 13 pages

Technaxx TX-58 User Manual - Dutch - 13 pages

Technaxx TX-58 User Manual - French - 13 pages

Technaxx TX-58 User Manual - Spanish - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info