487071
5
Zoom out
Zoom in
Previous page
1/16
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
5
Assembly page 5/16
Fax +32 2 359 95 50
INITIAL OPERATION
When you use your appliance for the first time, pour fresh water into the water tank
(without coffee) and switch on the appliance.
Once all the water has passed through, switch the appliance off and let it cool down.
When it is cold enough repeat the process with fresh water. Repeat this process twice.
PREPARATION OF COFFEE
Open the lid of the water tank.
Pour the desired amount of water into the water tank. Make sure not to overfill by
respecting the maximum level indicated on the water tank.
The filter holder is removable and has a carrying handle. Put the filter holder in the
appliance, and insert a paper filter (1X4) in it. Fill the filter with the desired quantity of
ground coffee, depending on the desired strength and the number of cups (you can read
the number of cups from the water level indicator).
Put the jug on the hotplate. This will slightly raise the filter holder, but thanks to the weight
of the filter holder, it will raise the anti-drip system as well, so that the coffee can go
through.
Switch on the coffee maker. The switch will be illuminated, indicating that your appliance
works. Thanks to the keep warm function, your coffee is warmed up as long as the
appliance is switched on. Note that the appliance will be switched on as long as you do
not switch it off manually. We advise you not to let the appliance switched on more than
2 hours and make sure that you never let an empty jug on the appliance.
Your appliance is equipped with an anti-drip function. When you remove the jug, an anti-
drip valve will automatically operate to stop any drops of coffee dripping onto the
hotplate. Replacement of the jug automatically opens the non-drip valve and allows
remaining coffee to filter trough into the jug. That’s why the position of the jug is very
important.
Wait until the brewing process is finished and the filter has run empty before removing the
jug.
DESCALING AND CLEANING
Descaling the coffee maker prolongs its life span. For descaling only use products
especially made for descaling of coffee makers.
Never use a dishwasher to clean the jug. Just clean it in soapsuds.
To clean the plastic parts of the appliance, use a damp, non-abrasive cloth.
PRACTICAL HINTS
When you notice that the coffee making process is longer than it should be it is probably time
to decalcify the appliance. Do not wait until the situation gets worse. The decalcifying
frequency depends on the amount of lime in water and therefore can be different from family
to family. Therefore it is important to pay attention to this.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team KM 12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team KM 12 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info