65194

Teac AG-H300 MK-III Manual

5
Zoom out
Zoom in
Previous page
1/28
Next page
5
ENGLISH
Reference 300mkIII
If you have TEAC Reference 300mkIII series, convenient
system control operations and AI direct play functions are
possible.
<
By pressing the STANDBY/ON button of A-H300mkIII, you can
switch ON/standby all the unit connected by remote control
cords.
<
When you press the PLAY button of a source, the INPUT
SELECTOR of A-H300mk
III is set to the source automatically.
<
The source you select by the INPUT SELECTOR of A-H300mkIII
will be played automatically.
<
When you turn on the system, the source that was selected
last time will start playback automatically.
< You can use the system remote control unit to operate all the
unit connected by remote control cords.
Connect the REMOTE CONTROL jack (A or B) of each
component by remote control cords.
System ConnectionRemote Control Unit
Remove the battery compartment cover.
Insert two “AAA” (R03, UM-4) dry batteries. Make sure that
the batteries are inserted with their positive “+
” and negative
“_
” poles positioned correctly.
Close the cover.
Battery Replacement
If the distance required between the remote control unit and
main unit decreases, the batteries are exhausted. In this case
replace the batteries with new ones.
Precautions concerning batteries
<
Be sure to insert the batteries with correct positive “+” and
negative “_
” polarities.
<
Use batteries of the same type. Never use different types of
batteries together.
<
Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
<
When the remote control unit is not to be used for a long
time (more than a month), remove the batteries from the
remote control unit to prevent them from leaking. If they leak,
wipe away the liquid inside the battery compartment and
replace the batteries with new ones.
<
Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.
3
2
1
The amplifier and Reference 300mkIII series connected by
remote control cords can be operated by the provided remote
control unit.
When operating the remote control unit, point it towards the
REMOTE SENSOR on the front panel of the A-H300mk
III.
< Even if the remote control unit is operated within the effective
range, remote control operation may be impossible if there
are any obstacles between the unit and the remote control.
<
If the remote control unit is operated near other appliances
which generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it may
operate incorrectly. Conversely, the other appliances may
operate incorrectly.
Battery Installation
Dubbing
When you intend to dub a cassette tape using 2 sets of R-
H300mk
II, don’t connect the remote control cords to the
second deck. Please use the buttons on the front panel.
REMOTE
CONTROL
Reference300mkIII
Reference300mkIII
A-H300mIII
REMOTE
CONTROL
Downloaded from www.Manualslib.com manuals search engine
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teac AG-H300 MK-III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teac AG-H300 MK-III in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info