658261
5
Zoom out
Zoom in
Previous page
1/8
Next page
5 Harmony Singer 2 User Manual
Connect a microphone to the MIC jack
Connect the OUT jack to a mixer, interface or active speaker
Connect a guitar to the Guitar Input jack on the right side of the pedal
Connect the left Guitar Output jack to an amplifier or mixing console
Optional:
Connect a micro USB cable to a computer
Connect power cable
Using the Har
mony Knob
The Harmony knob selects a single harmony voice or combination of voices
higher or lower in pitch than your voice. The chart below shows name and pitch
intervals for each position on the Harmony knob.
Guitar Input
Connect any guitar pedals between Harmony Singers Guitar Output jack and
the input of your amp. Connecting and activating some guitar pedals before the
Guitar Input jack may adversely aect vocal harmony production.
Tips:
• Strumming chords works better than single note playing for
harmony control
• When changing chords, ensure that the root and 3rd of each
new chord are played clearly
• To harmonize correctly from the rst chord of a song,
briey play the rst chord before singing
Momentary Mode
The standard function of the footswitch is a latching style, meaning that each
press of the footswitch turns the harmony on and o. Alternatively, the pedal can
operate in momentary mode, meaning that the harmony is only active while the
footswitch is held down. As soon as you release the footswitch,
the harmony is bypassed.
To switch the unit to momentary mode, hold the Tone button down while
powering the unit on. Repeat the process to return to latching mode.
Changing the Batteries
Harmony Singer 2 can operate on 4 AA batteries. Remove the single screw on
the bottom of the pedal to open the battery door. Make sure to observe correct
polarity when inserting the batteries.
Auto Gain
Harmony Singer 2 will automatically adjust the gain setting for your microphone,
eliminating the need for manual adjustments and ensuring that a good signal is
passed to the mixer without any unwanted distortion.
24 V Phantom Power
Phantom power is always active on the Harmony Singer 2. This will power
condenser microphones, but will not aect dynamic mics either.
Mic Control
Mic Control allows you to control the eect's on/o status via an
MP-75 microphone. Press and hold the footswitch while powering up the unit
to toggle Mic Control.
Note that when using a condenser microphone, Mic Control should be disabled to
prevent unwanted on/o switching.
Icon Name Interval
High 3rd above
Higher 5th above
High and Higher
3rd above
5th above
Low 4th below
Lower 6th below
Low and Lower
4th below
6th below
Higher and Lower
5th above
6th below
High and Low
3rd above
4th below
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TC Helicon Harmony Singer 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TC Helicon Harmony Singer 2 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info