658242
13
Zoom out
Zoom in
Previous page
1/15
Next page
Updating the firmware
Ditto Mic Looper English Manual – 2014-11-17 11
Frequently asked questions
Where should I place Ditto Mic
Looper in my signal chain?
To get the most out of your setup and the loops
you’re recording, place Ditto Mic Looper at the
end of your signal chain. This gives you the flex-
ibility to add parts with or without signal pro-
cessing by simply switching effects on and off
as required. For more information, see “Setup
examples”.
“How much loop time can I get
out of Ditto Mic Looper ?
Ditto Mic Looper provides five minutes of loop-
ing time.
“Whats the maximum number
of overdubs that I can record?
Our guess is that you will tire out before Ditto Mic
Looper does. Ditto Mic Looper allows an unlim-
ited number of overdubs – so do your worst!
“I made a mistake – how
do I undo a part?
Press and hold the LOOP footswitch on Ditto
Mic Looper while it is playing back your recorded
loop. The last part you recorded will be removed.
Footswitch LED
state reference
Use this section as a reference when you are not
sure what the current LED status means.
LOOP footswitch LED…
Off Device disconnected or no
loop in memory
Blinking green Loop in memory, playback/
recording stopped
Green Loop running (LED will blink
shortly when LOOP end is
reached)
Red Loop recording
Blinking red Loop currently being erased
Updating the firmware
TC-Helicon may provide updates for the built-in
software of your pedal, the firmware. Updating
your TC-Helicon pedal’s firmware requires…
a computer running Microsoft Windows or
OSX with a standard USB interface
the DC power supply that came with the ped-
al.
Preparing the firmware update
1. Download the newest firmware from
tc-helicon.com/products/
ditto-mic-looper/support/
There are updaters…
for Microsoft Windows (these are ZIP ar-
chives containing the firmware installer)
and
for OS X (these are disk image files con-
taining the firmware installer).
2. Unplug all cables (including the power sup-
ply) from your Ditto Mic Looper.
3. Connect the pedal to your computer using a
USB cable.
4. Hold down the LOOP footswitch.
5. Connect the power supply.
The LED will light solid green.
6. Release the footswitch.
Ditto Mic Looper will now be recognized as
an updatable device.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TC Helicon Ditto Mic Looper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TC Helicon Ditto Mic Looper in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TC Helicon Ditto Mic Looper

TC Helicon Ditto Mic Looper User Manual - German - 19 pages

TC Helicon Ditto Mic Looper User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info