729434

Taurus PROFESSIONAL 1500 Manual

9
Zoom out
Zoom in
Previous page
1/52
Next page
ing, up to desired snowy level.
- We recommend working by turning on the
button in cycles of 3 seconds and repeating the
operation until you obtain the desired result.
CABLE COMPARTMENT
- This appliance has a cable compartment situat-
ed on its underside (I).
SAFETY THERMAL PROTECTOR:
- The appliance has a safety thermal device,
which protects the appliance from overheating.
- In the event of overheating, the thermal safety
mechanism will be activated and the appliance
will stop operating. When this occurs, the ap-
pliance should be disconnected from the mains
and allow it to cool down.
- Once the appliance is cool, the thermal safety
mechanism will reset by itself.
SAFETY OVERLOAD PROTECTOR:
- The appliance has another safety device which
protects the appliance from overload.
- In the event of overload, the safety mechanism
will be activated and the appliance will stop
operating. When this occurs, the appliance
should be disconnected from the mains and
allow it to cool down.
- Then press the rearming button, situated at the
bottom of the appliance, with the tip of a pen
or similar in order to reactivate the appliance.
(Fig.2)
- Wait for approximately 15 minutes before re-
connecting. If the machine does not start again
seek authorised technical assistance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- During the cleaning process, take special care
properly into place (Fig.1).
- Put the ingredients, after having rst chopped
them into small piece, into the jar with liquid (do
not exceed the maximum marker).
- Use stirrer bar to introduce food easily.
- Put the lid on the jar; make sure it is properly
xed in place.
- Put the transparent cup in the lid.
- Connect the appliance to the mains.
- Start the appliance by turning on the ON/OFF
button (F). ATTENTION: before turn on the ON
button, be sure to set the minium speed.
- Choose desired speed using the speed regu-
lator control and start blending. ATTENTION:
hold the jar if uses high speeds.
- If you wish to add more ingredients pull out the
transparent cup.
- Add the ingredients and replace the transpar-
ent cup.
- To stop the appliance, selecting OFF option of
the button (F).
- To avoid a erce, start up of the fan, it is
advisable to start off from the lowest speed
position and, once the fan has been switched
on, progressively increase the speed to the
desired position.
ELECTRONIC SPEED CONTROL:
- The speed of the appliance can be regulated
by using the speed regulator control (G). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance, selecting OFF option of the
button (F).
- Unplug the appliance from the mains.
- Lift the jar from the motor body.
- Clean the appliance.
- ATTENTION: for your safety and to extend the
life of the device, the blades are not removable.
“PULSE / ICE CRUSH” FUNCTION
- The appliance works in highest speed to
achieve optimal performance.
- Turn on this button to operate and release the
button when you wish to stop operating.
- This function gives optimal result for ice-crush-
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Taurus PROFESSIONAL 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Taurus PROFESSIONAL 1500 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info