Manual Taurus Beguda Freda - 997150A (page 4 of 26) (English, French, Portuguese, Spanish)

799567

Zoom out

Zoom in

1/26

select small ice cubes to avoid the ice sticking

together.

3.2.6. The ice making cycle lasts approximately 6 to

13 minutes, depending on the selection of ice cube

size and the room temperature. The recommended

room temperature is 10°C to 40°C.

3.2.7. If the water pump cannot inject water, the ice

maker will stop automatically, and the “ADD WATER”

indicator will be on.

3.2.8. When the “ADD WATER” indicator turns on,

Press the “ON/OFF” button. Open the lid and fill the

water tank to the max mark with water. Then press the

“ON/OFF” button again to turn on the machine. Allow

the refrigerant liquid inside the compressor at least 3

minutes to settle before restarting.

3.2.9. The ice maker stops when the ice basket is full

and the “ICE FULL” indicator will be on. Warning:

Direct sunlight or sunlight reflection may cause infrared

sensor malfunction. If the unit doesn’t stop, then move

the unit where there’s no sunlight.

3.2.10. Change water in the reservoir every 24hours

for hygiene purposes. If the unit isn’t being used, drain

all the wate and dry the tank.

3.3. Automatic Cleaning

3.3.1. When the machine is in standby mode, press

the “CLEAN” button. You will then see 30 on the

display, which means 30 minutes for cleaning. After 30

minutes the machine will be on standby mode again.

3.3.2. If you want to stop the cleaning process, press

the “CLEAN” or the “ON/OFF” button. During the

cleaning, auxiliary tools, like neutral or food hygiene

cleaners, can be used.

3.4. Timer

3.4.1. Timing setting range: 1-24 hour. The default

timer is 1 hour.

3.4.2. Timed shutdown: the machine can be set to shut

down during the ice making process.

3.4.3. Timed start-up: When the machine is in standby

mode, a start time can be set.

3.4.4. How to set the timer.

3.4.4.1. Press the “TIMER” on the operation panel, it

will display 01H for the default timing, and the “H” will

be flashing. Then adjust the timing by pressing the “L”

for increasing 01H or “S” for decreasing, based on

your needs.

3.4.4.2. After 5 seconds the “H” will stop flashing and

the light will turn on, this means the setting is complete.

3.4.4.3. The “xxH” in the display indicates that the

machine currently has a timing function. After the

countdown is at zero, the machine will enter the mode

you need.

3.4.5. How to cancel the timer.

3.4.5.1. If the machine is timed (xxH on the screen),

press “TIMER”, and the “H” will flash on the screen,

press “TIMER” again. The timer will be cancelled. You

can also press the “ON/OFF” button for timing to cancel.

4. Recycling

4.1. These electrical products, cables, batteries,

packaging, and the manual, should not be mixed with

general household waste. For proper recycling, please

take these products to your nearest Creative

Housewares office where they will be accepted for

recycling free of charge.

4.2. Alternatively, please contact your local authority or

household waste disposal service for further details of

your nearest designated collection point. Correct product

disposal saves resources and prevents negative effects

on human health and the environment.

997150_IM.indd 4 2018/01/15 11:14:02 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Taurus Beguda Freda - 997150A in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 15.04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Taurus Beguda Freda - 997150A Manual

Product: