143596
4
Zoom out
Zoom in
Previous page
1/44
Next page
2
Contact the Call Centre immediately in any of the following situations. Do NOT
plug in or switch on your display:
If the power cable/power supply overheats or is damaged
If liquid is leaked into the monitor
If the LCD display is dropped or the housing damaged
Connecting
Observe the following instructions to connect your LCD display properly:
Power supply
Do not open the power supply housing. An open housing presents a
lethal hazard from electrical shock. There are no parts inside to be
cleaned or serviced.
Operate your LCD display only with grounded outlets with AC 100-240V/ 50-60 Hz. If
you are not sure about the power supply at your location, check with your power
company.
Use only the power supply and power connection cable provided.
For additional safety we recommend use of a surge protector to protect your LCD
display from damage resulting from voltage surges or lightning.
To remove the LCD display from the power supply, disconnect the plug from the
AC outlet.
Where the main plug is used as the disconnect device, the power outlet must be
in the vicinity of your LCD display and within reach of the power cables. DO NOT
stretch the power cables tightly to reach a power outlet.
You should arrange the LCD display cables in a manner so that no one can trip
over or step on them.
To avoid damage to cable do not place any objects or furniture on the cable.
Do not defeat the safety purpose of the polarized or grounding-type plug. If the
provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
Point of use
Keep your LCD display and all units connected to it away from moisture and avoid
dust, heat and direct sunlight. Failure to observe these instructions can lead to
malfunctions or damage to the LCD display.
Place and operate all units on a stable, level and vibration-free surface in order
to avoid the LCD display from falling.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tatung v32mcak e01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tatung v32mcak e01 in the language / languages: English as an attachment in your email.

The manual is 7,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info