490772
5
Zoom out
Zoom in
Previous page
1/8
Next page
RC-SS20 5
3Use with an SS-R1 or SS-CDR1
Connect the SS-R1/SS-CDR1 rear panel CONTROL
I/O (PARALLEL) connector with the RC-SS20
REMOTE 1 connector using a suitable cable. (See
“Connection cable” on the previous page.)
CAUTION
When connecting an SS-R1/SS-CDR1 to the REMOTE 1 •
connector, do not connect anything to the REMOTE 2
connector.
Turn OFF the power of the SS-R1 or SS-CDR1 unit •
before connecting or disconnecting the connection
cable. Connecting or disconnecting the cable while the
power is ON could cause malfunction.
Connecting with an SS-R1/SS-CDR1
Setting the SS-R1/SS-CDR1 recorder
Flash-starting tracks
Make the following settings.
Set the playback mode to
•
Single
. (See
“Specifying the playback mode” in “5–Playback”
on page 24 of the SS-R1 Owners Manual or page
27 of the SS-CDR1 Owner’s Manual.)
Set the EOM function as necessary. (See “End of
•
disc/track message (EOM)” in “5–Playback” on
page 33 of the SS-R1 Owners Manual or page 37
of the SS-CDR1 Owners Manual.)
The remaining time for the track or the playback
•
area can be set as a trigger. This remaining time
trigger can be set to OFF or between 1–99 seconds.
Set the playlist or folder that contains the tracks
•
that you want to flash start as the current playback
area. The first 20 tracks in the playback area
become available for flash start. (See “Play area”
in “5–Playback” on page 21 of the SS-R1 Owner’s
Manual or page 24 of the SS-CDR1 Owners
Manual.) (See also “Flash start function” on page
32 of the SS-R1 Owner’s Manual or page 36 of the
SS-CDR1 Owner’s Manual.)
1 Press the RC-SS20
LOAD/STOP key or the
remote control FLASH LOAD key, to load the
start data for the tracks in the playback area.
When loading completes, the RC-SS20
LOAD/
STOP key lights and the FLASH icon appears
at the bottom right of the home screen of the
SS-R1/SS-CDR1.
This completes the preparation.
If these procedures are not conducted, ordinary
direct play occurs instead, resulting in a little
time before the first sound is heard.
2 Press the playback key (1– 20) that corresponds
to the track that you want to flash-start.
The track begins playback instantaneously.
During playback, the key lights. When playback
ends the key indicator extinguishes.
CAUTION
The RC-SS20 indicators might not match the status of the
connected unit if that unit is set to any playback mode
other than Single or if operation is conducted from that
unit.
Playback keys (1–20)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam RC-SS20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam RC-SS20 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info