703354
3
Zoom out
Zoom in
Previous page
1/37
Next page
GB
Applications
This equipment has been calibrated as a precision weighing instrument and can be used to certify weights and/or
business transactions.
It can be used to obtain reference data during medical examinations, such as periodic checkups, and can help the
prevention of obesity.
4
Warning
To prevent electric shocks,
Do not insert or remove the power plug with wet hands.
To prevent fire hazards,
Always use a correctly wired 230V AC not multiple extension cords.
Caution
To prevent the spread of infections,
Always clean the Weighing platform after use. Sterilize the platform with an appropriate alcohol-based cleaning
fluid before each use.
Installation of the Weighing Platform
Ensure the weighing platform is placed on a level and stable surface. If the equipment is used when the Platform
is unstable, for example because not all the feet are on a level surface, there is a risk that it will topple over and it
will be impossible to obtain an accurate measurement.
To avoid the risk of injury and damage to the equipment, never jump on the platform.
How to handle the equipment when moving it
Since the Platform is heavy, please lift it by holding the Platform firmly with both hands so that you do not drop
it.
AC Adapter
Ensure that the adapter supplied (model A30930G) is always used with this equipment. Other adapters may
cause malfunctions.
Battery
When changing batteries, ensure that the new batteries are inserted with the correct polarity / . If the
polarity is incorrect, then the batteries may leak and damage the equipment.
Warning
This symbol indicates the risk of death or serious injury if the safety instructions
are ignored and the equipment is misused.
Caution
This symbol indicates the risk of physical injury and/or damage to the equipment
if the safety instructions are ignored and the equipment is misused.
This symbol indicates general precautions that should be taken when using this
equipment.
Safety Notes
Caution Symbols
In this Instruction Manual and the descriptions on the equipment, there are various caution symbols that will enable you
to use this equipment safely and correctly so that harm to you and other people and loss of your property will be
prevented.
The symbols and their meanings are as follows. Please understand them well before proceeding with the Instruction
Manual.
GB
The circuit board incorporates a fuse (100mA, 125V) for electronic equipment. If devices other than the original
AC adapter are used or a large electrical current is applied, the fuse will be blown for safety purposes. If the fuse
is blown, the unit must be inspected and repaired. As the fuse forms a fixed part of the unit and cannot be easily
disassembled by the customer, please consult your nearest Tanita sales office or agent when the fuse needs to be
replaced.
[Maintenance]
This is a precision manufactured and accurately calibrated product. Please observe the following instructions.
Never disassemble or adjust the equipment, as this may cause malfunctions. The equipment should only be
inspected in accordance with the regulations in each country.
When not in use for a long time, unplug the AC Adapter from the wall socket.
When not in use for a long time, remove the batteries before storing the equipment.
Do not wipe the equipment with corrosive chemicals (benzine, cleaner, etc.). Please use a neutral detergent to
clean the equipment.
Avoid subjecting the equipment to excessive shocks or vibrations.
When disposing of this unit, please do so in accordance with the prevailing regulations in each country.
If an unauthorised person attempts to disassemble or repair any of the part, the warranty will become invalid.
When the unit malfunctions, please consult your nearest Tanita sales office or agent.
[Instructions for Measurement]
Please observe the following instructions for accurate measurement.
Measurement may not be possible on a surface that is strongly vibrating. In such cases transfer the equipment to
a stable surface with little or no vibration.
When the equipment has been transferred to another location with a temperature difference of more than 20˚C,
leave at least two hours before using.
While taking measurements, please keep any persons using transmitters, such as a mobile phone, away from the
unit to avoid causing margin errors.
<Usage Conditions>
<Storage Conditions>
<Power Source>
5
Temperature Range for Use : 0°C / +35°C
Relative Humidity : 30% / 80% (without condensation)
Temperature Range of Environment : -10°C / +50°C
Range of Relative Humidity : 10% / 90% (without condensation)
To avoid malfunctions, do not store the equipment in direct sunlight, significant temperature changes, the risk of
dampness, a large amount of dust, in the vicinity of fires or where there is a risk of receiving vibrations or shocks.
Value Range
230VAC
50Hz
65mA
Voltage Range
Frequency Range
Electric Current Range
WB-100MA-取説/04.01.27 04.1.28 9:12 AM ページ4
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita WB-110MA III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita WB-110MA III in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info