Manual Tanita UM-073 (page 4 of 23) (English, German, Dutch, French, Italian, Portuguese, Spanish)

659116

Zoom out

Zoom in

1/23

GBGB

3.Recall Function

The previous readings of the following features can be obtained using the recall function.

・Weight

・Body Fat %

・Total Body Water %

・Muscle Mass

To obtain previous readings, press the SET button while the current readings are being displayed.

The display will show the previous readings.

To see other previous readings, press the Up/Down buttons for each desired reading.

Press the SET button again to go back to the current result display.

Note:For Children (age-5-17), the unit will only display the previous Weight and the Body Fat %.

1. Select Personal Data Number

Press the Down button to turn on. Use the Up/Down buttons to select

your Personal data number. Press the Set button to confirm.

(Release the key within 3 seconds or the display will show “Error”.)

The unit will beep and the display will show the programmed data.

The unit will beep again and the display will show “0.0”. Now

step onto the platform.

Note: •If you step onto the platform before “0.0” appears the display will show

“Error” and you will not obtain a reading. Furthermore, if you do not step

onto the measuring platform within about 30 seconds after “0.0” appears,

the power is shut-off automatically.

•When using the “Down” button to turn the unit on, the personal data

number last used will appear first.

•Numbers that are not pre-programmed are automatically skipped.

TAKING WEIGHT AND BODY FAT READINGS

PROGRAMMING THE GUEST MODE

TAKING WEIGHT MEASUREMENT ONLY

Guest mode allows you to programme the unit for a one-time use

without resetting a Personal data number.

Press ▲ button to activate the unit. Then follow the

steps: Set Age, Select Female or Male, and Specify Height.

Note : If you step onto the platform before “0.0” appears the display will show

“Error” and you will not obtain a reading.

Select Weight-Only Key

Press the Weight-only key. After 2 or 3 seconds, “0.0” will appear

in the display and the unit will beep. When “0.0” appears in the

display, step onto the platform. The body weight value will appear.

If you remain on the platform, the display will flash for about 30

seconds, and then the power will automatically turn off. If you step

off the platform, the weight will continue to show for about 5

seconds, then “0.0” unit will shut off automatically.

2.Obtain Your Readings

Your weight will be shown first.

Continue to stand on the platform.

“0000” will appear on the display and disappear one by one from left to right.

Your Body Fat percentage (%FAT) and Body Fat Range will appear on the

display screen. After your body fat percentage has been calculated, a white bar

will flash the healthy range indicator along the bottom of the display identifying

where you fall within the Body Fat Ranges for your age and gender.

Note:Do not step off until Body Fat % is shown.

Note:For children(age 5-17),the unit will only display the weight / Body Fat %

and Healthy Range Indicator.

To see other readings, carefully step off scale, press the up button

continually to display readings in the order listed below.

(Press the down button for reverse.)

The Up/Down buttons will not function while remaining on scale.

UM-073/マニュアル-0717 07.7.20 5:41 PM ページ7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tanita UM-073 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tanita UM-073 Manual

Product: