Manual Tanita BC-613 (page 4 of 80) (English, German, Dutch, French, Italian, Spanish)

703351

Zoom out

Zoom in

1/80

To ensure accuracy, readings should be taken without clothing and under consistent conditions of hydration. If you do not undress,

always remove your socks or stockings, and be sure the soles of your feet are clean before stepping onto the measuring platform.

Be sure your heels are correctly aligned with the electrodes on the measuring platform. Don’t worry if your feet appear too large for the

unit, accurate readings can still be obtained if your toes overhang the platform. It is best to take readings at the same time of day. Try

to wait about three hours after rising, eating, or exercising before taking measurements. While readings taken under other conditions

may not have the same absolute values, they are accurate for determining the percentage of change as long as the readings are taken

in a consistent manner. To monitor progress, compare weight and body fat percentage taken under the same conditions over a period

of time.

Note: An accurate reading will not be possible if the soles of your feet are not clean, or if your knees are bent or you are in a sitting

position.

Handling Tips

This monitor is a precision instrument utilising state-of-the-art technology.

To keep the unit in the best condition, please follow these instructions carefully:

• Do not attempt to disassemble the measuring platform.

• Store the unit horizontally, and place it so that the buttons will not be pressed accidentally.

• Avoid excessive impact or vibration to the unit.

• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.

• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny; avoid

using soaps.

• Do not step on the platform with wet feet.

• Do not drop any objects onto the platform.

Inserting the Batteries

Turn the scale over and remove the battery cover by releasing the latch, insert 4 x AA batteries

(included) with the correct polarity as indicated.

Note: Be sure that the polarity of the batteries is set properly. If the batteries are incorrectly

positioned the fluid may leak and damage floors. If you do not intend to use this unit

for a long period of time, it is advisable to remove the batteries before storage.

Please note that the included batteries from the factory may have decreased energy levels over

time.

Positioning the Monitor

Place the measuring platform on a hard, flat surface where there is minimal vibration to ensure

safe and accurate measurement.

Note: To avoid possible injury, do not step on the edge of the platform.

Open as

shown.

Direction of

the batteries.

PREPARATIONS BEFORE USE

GETTING ACCURATE READINGS

AUTOMATIC SHUT-DOWN FUNCTION

The automatic shut-down function shuts off the power automatically in the following cases:

• If you interrupt the measurement process. The power will shut down automatically within 20 to 70 seconds, depending upon the

type of operation.

• If an extreme weight is applied to the platform.

• During programming, if you do not touch any of the buttons within 60 seconds.*

• After you have completed the measuring process.

*Note: If the power shuts off automatically, repeat the steps from “Setting and Storing Personal Data in Memory” (p.4).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BC-613 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 20,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tanita BC-613 Manual

Product: