659108
4
Zoom out
Zoom in
Previous page
1/52
Next page
2
To ensure accuracy, readings should be taken without clothing and under consistent
conditions of hydration. If you do not undress, always remove your socks or
stockings, and be sure the soles of your feet are clean before stepping on the
measuring platform.
Be sure that your heels are correctly aligned with the electrodes on the measuring
platform. Don’t worry if your feet appear too large for the unit accurate readings can
still be obtained if your toes overhang the platform.
It is best to take readings at the same time of day. Try to wait about three hours after
rising, eating, or hard exercise before taking measurements.
While readings taken under other conditions may not have the same absolute
values, they are accurate for determining the percentage of change as long as the
readings are taken in a consistent manner. To monitor progress, compare weight
and body fat percentage taken under the same conditions over a period of time.
Note: An accurate reading will not be
possible if the soles of your feet are
not clean, or if your knees are bent or
you are in a sitting position.
Heels centered on
electrodes
Toes may overhang
measuring platform
Handling Tips
This monitor is a precision instrument utilizing state-of-the-art technology.
To keep the unit in the best condition, follow these instructions carefully:
•Donotattempttodisassemblethemeasuringplatform.
•Storetheunithorizontally,andplaceitsothatthebuttonswillnotbepressedaccidentally.
•Avoidexcessiveimpactorvibrationtotheunit.
•Placetheunitinanareafreefromdirectsunlight,heatingequipment,highhumidity,orextremetemperaturechange.
•Neversubmergeinwater.Usealcoholtocleantheelectrodesandglasscleaner(appliedtoaclothfirst)tokeepthemshiny;avoid
soaps.
•Donotstepontheplatformwhenwet.
•Donotdropanyobjectsontotheplatform.
•Donotjumpontoorofftheunit.
Note: To avoid possible injury, do not step on the edge of the platform.
Inserting the Batteries
Open the battery cover on the back of the measuring platform. Insert the supplied
AA-batteries as indicated.
Note: Be sure that the polarity of the batteries is set properly. If the batteries are incorrectly
positioned the fluid may leak and damage floors. If you do not intend to use this
unit for a long period of time, it is advisable to remove the batteries before storage.
Please note that the included batteries from factory may have decreased energy levels over
time.
Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal vibration to
ensure safe and accurate measurement.
PREPARATIONS BEFORE USE
GETTING ACCURATE READINGS
AUTOMATIC SHUT-DOWN FUNCTION
The automatic shut-down function shuts off the power automatically in the following cases:
•Ifyouinterruptthemeasurementprocess.Thepowerwillshutdownautomaticallywithin30secondsdependinguponthetypeof
operation.
•Duringprogramming,ifyoudonottouchanyofthekeysorbuttonswithin60seconds.*
•Afteryouhavecompletedthemeasuringprocess.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita BC-541N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BC-541N in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 13,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info