545065
5
Zoom out
Zoom in
Previous page
1/12
Next page
3
EN
The platform needs to pair with the compatible software before measurements are attempted.
Compatible Software: “Healthy Edge”
1) Before proceeding,
•Installthebatteriesintheplatform.
•InstallthesoftwareonyourPC(TheANTDriverisinstalledonyourPCautomatically).
•PlugtheANT+sticktoUSBportofyourPC.
•Placetheplatformwithin17feet(5m)ofyourPC.
2) Open the software and select your user profile (which is entered before pairing).
3) Click “File” from top left menu, and click “Healthy Edge Options”.
4) Select “BC-1500” and click “Connect”. Input the 5 digit serial number found on the bottom of the platform, and then click
“OK”. The software memorizes the latest inputted serial number of the platform even if you close the software or PC.
5) The platform will beep once and the Green Indicator Light on the platform will blink.
6) Step onto the platform and grip the handle-electrodes while the Green Indicator Light is blinking. The
platform will beep twice and the Green light turns solid green after pairing is complete.
Your platform is now paired with your PC.
7) For the measurement, click “New Measurement” to use the platform directly from the
Software.
Note:
•Pleasegripthehandle-electrodeasshown,usingalight-firmpressure.
•Placeyourhandsonyourside,anddonotmoveuntilmeasurementiscompleted.
•Keepyourarmsstraightupanddownwhilemakingsurethatyoudonottouchyourlegsorany
part of your body with your arms or hands.
•Ifyoustepontotheplatformbefore“BlinkingGreenLight”appears,thesoftwarewillshowerror
massage and you will not obtain a reading. Furthermore if you do not step onto the platform
within about 30 seconds after “Blinking Green Light” appears, the power of the platform will shut
off automatically.
•Donotpullthehand-electrodescablepasttheredmark.
•Donotcarrytheunitbyholdingthehand-electrodes.
•Donotreleasethehand-electrodesunitthecableiscompletelyretractedintotheunit.
Pairing the BC-1500 (“Platform”) with software and measurement
Indicator light information
Blinking Green Light: Ready for measurement
Solid Green Light: Complete measurement
Solid Red Light: Error
Blinking Red Light: Low Battery
Blinking Green Light: Measurement Whole Body
Blinking Green Light: Measurement Left Leg
Blinking Green Light: Measurement Right Leg
Blinking Green Light: Measurement Left Arm
Blinking Green Light: Measurement Right Arm
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita BC-1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BC-1500 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info