545131
4
Zoom out
Zoom in
Previous page
1/7
Next page
2
Using TANITA Wireless Remote Display (D-1000plus and D-1100plus)
Initial Setting (Clock Setting)
Insert batteries into the remote display and then press
any front panel button to set the clock.
1. Set Hour
Press s/t buttons to set hour and then press SET.
The unit will beep once to confirm.
2. Set Minute
Press s/t buttons to set minute and then press SET.
The unit will beep twice to confirm the programming.
Resetting time
Press the clock button on the bottom of the remote
display.
Then follow the clock setting procedure 1) and 2).
Pairing the remote display and the BC-1100F (”platform”)
The platform needs to pair with the applicable remote display before measurements are attempted.
Pairing compatible remote displays: D-1000plus and D-1100plus
1) Before proceeding,
a) Install the batteries in the platform.
b) Install the batteries and set the clock in the remote display.
c) The platform and the remote display are within 17 feet (5 m) of each other.
2) Press and hold OFF button for 2 seconds on the
remote display. The remote display will show "1234"
for selecting a personal number. Select the preferred
personal number which will be paired with the
platform using s/t buttons and press the SET button
to confirm.
3) The remote display will show "SEt-P". Select "YES" or
"no" using s/t buttons, and press the SET button to
confirm,
a) "YES": The pairing process will continue to the next step.
b) "no": The pairing process will be cancelled and then the
clock will be displayed.
4) Input the 5 digit serial number found on the bottom of
the platform using s/t buttons and press the SET
button to confirm.
Cancellation-1: Press the OFF button to cancel during the pairing process and then the clock will be displayed.
Cancellation-2: The pairing process will be cancelled if inactive for 1 minute and then the clock will be displayed.
Note : “ 00000 ”, “ 000001 ” and more than “ 65535 ”.
These serial numbers are not allowed. Please input the correct serial number.
The serial number is located on the bottom of the platform.
Continued on the next page.
t
Backlight Button
Upright Position
Battery Cover
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tanita BC-1100F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tanita BC-1100F in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info