540638
2
Zoom out
Zoom in
Previous page
1/3
Next page
Tacx Trainer software Connected devices
- 2 - October 17, 2013
No connection
If there is no connection, the device is displayed with a red cross. Make
sure the USB cable is properly connected and the adaptor switch is on.
If the connection does not work, it may be that the driver is not installed
properly. Go to the Tacx website and check the Frequently Asked
Questions about problems with the USB connection and the installation
of the driver.
Linking Bushido/Vortex
When starting up the Tacx Trainer software, the software automatically
searches for the Bushido and Vortex ergotrainer, if the ANT+ stick is in
the computer. It is also possible, using the menu at the right, to
manually link the connected devices to the PC. Make sure that the
ANT+ USB stick is plugged firmly into the computer and that there are
no interfering obstacles.
Linking Genius
First use
Read the instructions on the screen and follow the steps below:
1. Plug the ANT+ stick into the computer.
2. Start up the software. When a pop-up appears, push the middle button of the interface
computer simultaneously (as shown).
3. A pop-up appears with the message that the new interface computer has been found.
Confirm with Connect.
4. Run the keypad calibration by pushing the upper arrow.
5. Make sure that the wheel has been placed correctly on the brake.
6. A pop-up appears with the message that the new brake has been found. Confirm with
Connect.
BlackTrack
1. It will connect automatically when the batteries have been put in the BlackTrack and by
steering to the left.
2. A pop-up appears with the message that the new BlackTrack has been found. Confirm with
Connect.
When you have used the trainer before, the software will find the trainer automatically the next time,
after you have plugged the brake into the power grid and after pressing on the interface computer.
When the BlackTrack is in sleeping mode, you have to turn the wheel to the left as far as possible. A
green light will then start to blink.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tacx Tacx Trainer software 4 Trainingen at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tacx Tacx Trainer software 4 Trainingen in the language / languages: German as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tacx Tacx Trainer software 4 Trainingen

Tacx Tacx Trainer software 4 Trainingen User Manual - English - 10 pages

Tacx Tacx Trainer software 4 Trainingen User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info