540608

Tacx Flow computer Manual

3
Zoom out
Zoom in
Previous page
1/27
Next page
4 5
EN
NL
DE
JP
IT
ES
FR
CH
Function during configuration
Press in combination with MODE key for 10 seconds to enter the SETUP menu
(countdown appears)
Change setting
Change setting
Next step
Exit the SET UP menu
Function during cycling
Select training type based on slope or power
Change training setting
Page through display functions
Change training setting
Page through display functions
Page through MODE functions
Confirm training type
Resetting training information
When you are not cycling, you can reset the ETM, TRP, MAX and AVS training information by
pressing the SET and MODE keys at the same time for 2 seconds. It is not possible to reset the
ODO (the total number of kilometres cycled on the trainer). Once it has reached 99,999 km it will
automatically reset to 0 km (or miles). All the trip data is also reset when the Flow computer is
switched off. When the computer is restarted everything is set to 0 again, except the ODO.
Keys and their functions
SET
MODE
SET
MODE
When you put the plug into the wall socket, the entire display lights briefly as a test. Then various
parameters are shown for two seconds:
• frequency(50or60Hz)andvoltage(110or220V)ofthemainspower
• versionnumberofthefirmware
• scalefactor(100%)
• bodyweight(75kg)
• speedindicationandtripenergyconsumption(km/h,kJoule)
Then the start screen appears. If you want to use the standard settings, you can begin straight away.
If not, follow the instructions below.
Press SET and MODE at the same time for 10 seconds. Now the text SET UP appears on the display
and the body weight flashes.
Weight
Body weight (without bicycle) flashes. You can use the Up arrow or Down arrow to set the
weight between 40 and 120 kg. Use MODE to go to the next step.
Speed
Km flashes. You can change Km to Mi with the Up arrow or Down arrow. Use MODE to go to the
next step.
Energy
Kcalflashes.YoucanchangeKcaltokJoulewiththeUp arrow or Down arrow. Use MODE to go
to the next step.
Settings before you begin
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tacx Flow computer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tacx Flow computer in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info