Manual Synq DMC-1000 (page 7 of 72) (English, German, Dutch, French, Portuguese, Spanish)

468032

Zoom out

Zoom in

1/72

ENGLISH OPERATION MANUAL

SYNQ

9/139 DMC1000

A. PLAY: appears while the unit is playing a CD.

B. PAUSE: appears while the player is in pause or cue mode.

C. CUE: appears when the player is waiting at the CUE-point.

D. TOUCH INDICATOR: appears when the touch sensitive part of the jog wheel is active.

E. ALPHANUMERIC DISPLAY: Shows all kinds of important information like effect parameters,

loop information, ID3-tags, …

F. BPM DISPLAY: the automatic beat counter shows the number of Beats Per Minute on the

display. In manual mode the display shows “BPM”. In automatic mode the display shows

“AUTOBPM”. (press the TAP button for 2seconds to switch to automatic mode)

G. MEMORY BUCKET: shows the status of the buffer memory needed for anti-shock and some

special functions. Each bar of the bucket represents 2seconds buffer memory.

H. AUTO CUE: appears when the “auto cue” function is active. See SGL/CTN button (14).

I. RELOOP: shows when a loop is programmed. (repeating a particular area)

 RELOOP Flashing: Loop is programmed and currently playing.

 RELOOP on: Loop is programmed but not playing.

J. SINGLE: appears when the unit is set to play just one track at a time. When it is not shown, the

CD plays continuously through all tracks. The function is controlled by the SGL/CTN button (14).

K. MP3 indicator: appears when an MP3-file is playing.

L. TRACK indicator: shows the number of tracks available in your current selection.

 Standard lookup: (no Q-Dbase) the track numbers in the current folder (M) are shown.

 Q-Dbase lookup: the track numbers that correspond to your Q-Dbase pre-selection.

M. FOLDER/SEARCH KEY indicator: the information depends on the lookup mode you selected.

 Standard lookup: (no Q-Dbase) the current folder number is shown.

 Q-Dbase lookup: the current search key (Art, Alb or Gen) is shown.

N. ELAPSED, TOTAL REMAIN: indicates that the time shown on the display is the track elapsed,

remaining or total remaining time.

O. MINUTE: Shows “minutes” time information of current track.

P. SECOND: Shows “seconds” time information of current track.

Q. FRAME: Shows “frame” time information of current track. (1 frame = 1/75

sec.)

R. TIME BAR: has 2 functions:

 During normal playback: shows either time remaining or elapsed depending on the

setting of the TIME button. Starts flashing at the end of each track to alert the user to take

action.

 During loop playback: shows the time remaining until the end of the loop. This visual aid

helps you to see where and when the seamless loop starts again.

S. PITCH DISPLAY: Shows the actual percentage of speed change, selected with the SPEED

slider (30). The small red colored padlock is shown when the pitch lock function (Master Tempo)

is active.

T. CD / USB INDICATOR: indicates the current input source: USB or CD.

ENGLISH OPERATION MANUAL

SYNQ

10/139 DMC1000

CONNECTIONS

SIMPLE SETUP – 1 DECK

 Connect the supplied cinch (RCA) cable between the audio output (4) of the player and the line level input

of your audio mixer.

 If available, connect the supplied fader start cable between the fader start output (3) of the player and the

fader start input on your mixer.

 Connect the supplied power cord between the mains input (1) on the player and the mains socket.

 You can now play CDs and connect USB-storage, loaded with MP3 and WAV files.

SETUP – 2 OR 3 DECKS

For each deck follow the instruction for “simple setup – 1 deck”.

 Connect a USB hard disk to the USB2-connection (8) of player1.

Note 1: the hard disk must be formatted in FAT32! A hard disk formatted in NTFS (mostly drives with

big capacity) will NOT be recognized: such hard disk should be re-formatted in FAT32! (this can be

done under Windows, we can’t offer any support for this!)

Note 2: the USB-slots on this player can each deliver 1A power to the connected hard disk. However

we suggest using a hard disk with separate power supply for better reliability.

 Use the supplied USB-cable to connect the USB-link connection (9) of player1 to the USB2-connection (8)

of player2. (if you have a 3

player, connect players 2 and 3 in the same way)

 Use the SOURCE SELECT button (11) to select USB2 on the decks: the players will connect to hard disk.

 You can now play CDs and MP3 / WAV files from the connected hard disk.

IMPORTANT: for good, stable performance only use a good quality USB-cable with a maximum

length of 1meter!

SETUP – MIDI CONTROLLER

For each deck follow the instruction for “simple setup – 1 deck”.

 Use the supplied USB-cable to connect the USB-link connection (9) of player1 to one of the USB-

connections on your computer.

 Use the supplied USB-cable to connect the USB-link connection (9) of player2 to one of the USB-

connections on your computer.

 In the setup menu: set option B (MIDI setup) to USB = MIDI. (see chapter SETUP MENU for support)

 Press the SOURCE-button (11) until the 3 LEDs (USB1+USB2+CD) are lit: the player is in MIDI-mode.

 Use the MIDI PLAYER A/B button (51) to select player1 as MIDI-controller A and player2 as MIDI-

controller B.

 Configure your DJ software so it can be used with the DMC1000: this configuration depends completely on

the PC-program you will use. This part of the installation and the use of the PC software is not supported

by Synq! However we advise you to check our website to see if we have a midi-map file for the PC

software of your choice available for download.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Synq DMC-1000 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Synq DMC-1000 Manual

Product: