Manual Sygonix MH-912 (page 4 of 12) (English, German, Dutch, French)

675168

Zoom out

Zoom in

1/12

Operating instructions

Plug-in thermostat with LCD

Item no. 1428341

Intended Use

The product is used to automatically turn on/off an electric load (e.g. heater or air conditioner)

when the temperature is below/above a certain level.

The product must be connected to a mains socket with earth contact. See chapter „Technical

Data” for information on connection and the maximum permissible power consumption of the

connected electrical loads.

For safety and approval reasons, you may not convert and/or alter the product. If you use the

product for purposes other than those described above, the product may be damaged. Moreo-

ver, the improper use involves risks such as short-circuits, re, electric shocks, etc. Please read

the operating instructions carefully and do not discard them. If you pass the product on to a third

party, please hand over these operating instructions as well.

This product complies with the applicable National and European Regulations. All names of

Package Contents

• Plug-in thermostat

• Sticker set

• Operating Instructions

Up-to-date operating instructions

Download the latest operating instructions via the link www.conrad.com/downloads or scan the

QR code. Follow the instructions on the website.

Explanation of Symbols

The lightning symbol inside a triangle is used when there is a potential risk of per-

sonal injury, such as electric shock.

An exclamation mark in a triangle indicates important instructions in this operating

manual which absolutely have to be observed.

The arrow symbol is used to indicate where specic tips and information on handling

should be given.

Observe the operating instructions!

Safety Instructions

Please read the operating instructions carefully and pay particular attention to

the safety instructions. We do not assume liability for injuries/material damag-

es resulting from failure to observe the safety instructions and the information

in these operating instructions regarding the proper handling of the product.

Furthermore, in such cases, the warranty/guarantee will be null and void.

a) General

• The product is not a toy. Keep out of the reach of children and pets.

• Do not leave the packaging materials unattended. It may become a dangerous

plaything for children.

• Protect the product from extreme temperatures, direct sunlight, strong vibrations,

high humidity, moisture, combustible gases, vapours and solvents.

• Never expose the product to mechanical stress.

• If safe operation is no longer possible, take the device out of service and secure

it against unintended use. Safe operation is no longer possible, if the product:

- has visible damage,

- no longer functions properly,

- has been stored under adverse ambient conditions for an extended period of

time or

- has been exposed to considerable strain during transport.

• Please handle the product carefully. The product can be damaged if crushed,

struck or dropped, even from a low height.

• Also observe the safety and operating instructions of any other devices that are

connected to this product.

• If you have doubts about how the product should be operated or how to safely

connect it, consult a trained technician.

• Maintenance, adjustment and repair work may be carried out only by an expert or

a specialist workshop.

• If you have any questions that are not answered in these operating instructions,

please contact our technical customer service or another specialist.

b) Connection and Operation

• The product‘s design complies with protection class I. Only an earthed mains

socket connected to the public power supply may be used as power supply to

the product.

• The mains socket into which the plug-in thermostat is plugged must be easily

accessible.

• The plug-in thermostat is equipped with a child safety device. Only when the

prongs of the interconnection are placed in both openings of a front socket at the

same time will the child-lock mechanism release the opening.

Nevertheless, take special caution when children are around. Children are not

aware of the potential danger associated with the incorrect handling of electrical

appliances. There is a risk of a life-threatening electric shock!

• The product is only intended for use in dry indoor locations. No part of the product

should become damp or wet; never handle it if your hands are wet! Never set up

the product in the direct vicinity of a bathroom, shower, bathtub or similar. There is

a risk of a life-threatening electric shock!

• Use the product only in a temperate climate, never in a tropical climate.

• Do not operate the device in environments where there are high levels of dust,

ammable gases, vapours or solvents. There is a danger of re and explosion!

• Never operate the plug-in thermostat in a vehicle.

• Do not connect the product to the power supply immediately after it has been

transferred from a cold room into a warm one (e.g., during transport). The conden-

sation that forms might destroy the device. Moreover, there is danger of electric

shock! Allow the product to reach room temperature. Wait until the condensation

has evaporated. This might take several hours. Only after this should the product

be plugged into the power supply and put into use.

• Never pull out the plug-in thermostat by pulling on its cable when disconnecting it

from the front socket of the humidity controller. Always pull the plug out of the front

socket by gripping the area provided for this purpose on its sides.

• Do not overload the plug-in thermostat. Observe the connected load in the chapter

„Technical Data”.

• Always unplug the plug-in thermostat from the mains socket before cleaning it or

when the device is not be used for a long time.

• Never pour any liquids above or next to the product. You run the risk of causing a

re or a fatal electric shock.

If any liquid has still happened to enter the device, immediately turn off the power

supply to the plug-in thermostat to which the table fan is connected (turn off the

fuse/circuit breaker/residual current operated circuit breaker of the associated cir-

cuits). Only then can you unplug the plug-in thermostat from the mains socket and

contact a specialist. Do not use the product any longer.

• Do not connect in series! This can lead to overloading of the plug-in thermostat!

There is a risk of re!

• Do not operate while covered! At higher connected loads, the plug-in thermostat

will get hot, which may lead to overheating posing a risk of re, if it is covered!

• Only voltage-free, when the plug is unplugged!

• If the plug-in thermostat is damaged, do not touch it; there is a danger to life from

electric shock!

First, switch off the mains voltage to the socket, to which the plug-in thermostat

is connected (switch off at the corresponding circuit breaker or remove the safety

fuse or switch off at the corresponding RCD protective switch, so that all poles of

the mains socket are disconnected).

Then you can remove the plug-in thermostat from the mains socket. Don’t use

the damaged plug-in thermostat any more, dispose of it in an environmentally

friendly way.

c) Placement of the connected heater/air conditioner

• Please comply with the operating instructions of the heater/air conditioner that you

connect to the plug-in thermostat.

• For safety reasons, many heaters/air conditioners must not be operated without

supervision.

• In any case, keep a sufcient distance between the heater/air conditioner and

ammable items (e.g. curtains).

• Place a portable heater/air conditioner only on a stable, at, level surface.

• Never cover the heater/air conditioner.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sygonix MH-912 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sygonix MH-912 Manual

Product: