565049

Sygonix 43176A LAN Camera Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
The home technology brand for the entire house. More information at www.sygonix.com
GB
Operating instructions
LAN Colour Camera
Intended use
The product is intended for surveillance by means of the integrated camera. The opera-
tion takes place via a wired 10/100MBit network (RJ45 connector).
The product must not get damp or wet, it is intended only for use in dry, indoor loca-
tions.
The power for the camera is supplied via the power transformer included in delivery.
Please bear in mind that it is prohibited by law to watch strangers with a camera with-
out their knowledge and consent. Observe the rules and regulations of the country
where you are using the camera.
Any other use than that described above may damage the product. Moreover, this
may give rise to hazards such as short-circuiting, fi re, electric shock, etc. No part of the
product may be modifi ed or converted!
The safety instructions and technical data must be followed without fail!
This product complies with the applicable National and European requirements. All
names of companies and products are the trademarks of the respective owner. All
rights reserved.
Package Contents
• LAN Camera
• Network cable
• Bracket with mounting material
• Wall plug transformer
• Mini DVD with software and an extensive operating manual in English language
(PDF)
• Quick guide
Explanation of the Symbols
The lightning symbol indicates a health hazard, e.g. electric shock.
This symbol indicates specifi c risks associated with handling, function and
use.
The "arrow" symbol indicates special tips and operating information.
Safety Instructions
The warranty will be void in the event of damage caused by failure to
observe these safety instructions! We do not assume liability for any
consequential damage!
Nor do we assume liability for damage to property or personal injury
caused by improper use or failure to observe the safety instructions. The
warranty will be void in such cases.
• The unauthorised conversion and/or modifi cation of the product is not per-
mitted because of safety and approval reasons (CE). Never dismantle the
product.
• The product is not a toy and must be kept out of the reach of children. It
should be operated out of the reach of children.
• The use of the surveillance camera system does not replace the personal
supervision of children, or people who require special assistance, but only
serves as a support to this supervision.
• The design of the wall plug transformer complies with protection class II.
Only use a proper outlet of the public supply system as a voltage source for
the power supply.
• The product should only be used in dry indoor areas, it must not become
damp or wet! There is a risk of a lethal electric shock!
• The camera should not be exposed to extreme temperatures, direct sun-
light, strong vibrations or heavy mechanical stress.
• Make sure that the connection cable is not pinched or damaged by sharp
edges.
• Do not leave packaging material carelessly lying around since it could be-
come a dangerous plaything for children.
• Handle the product with care, it can be damaged by impacts, blows, or ac-
cidental drops, even from a low height.
• If the camera is used with other devices (e.g. a monitor), the operating in-
structions and safety notices for these devices must be followed as well.
• It can be assumed that safe operation is no longer possible if:
- the device is visibly damaged,
- the device no longer works
- the device has been stored under adverse conditions.
- it was exposed to heavy loads during transport
• In commercial institutions, the accident prevention regulations of the Em-
ployer’s Liability Insurance Association for Electrical Systems and Operating
Materials are to be observed.
• Disconnect the power supply from the camera if it is not to be used for a
while (e.g. for storage).
• If you have any questions that are not answered in this manual, please con-
tact our technical service or another specialist.
Getting started, Connection via RJ45
• Connect the camera's RJ45 connector to a 1:1 connected network cable and its net-
work, e.g. a network switch.
• Connect the low-voltage socket of the camera to the corresponding round plug on
the enclosed power adapter. Insert the wall plug transformer into a mains socket,
the "power"-LED on the front of the camera lights up.
• Insert the mini DVD provided in the appropriate drive of your computer. If the installa-
tion software on the CD does not start automatically, you must start the installation
programme manually. When this operating manual was prepared, the programme
was located in the main directory of the DVD (programme name "Autorun.exe").
Follow the programme's instructions.
Be aware that the names and descriptions of the installation procedure, as described
here, may be changed in newer versions of the software. In this case please observe
the accompanying English language operating manual on the DVD (PDF format).
• Start the software that you just installed ("IP Discovery Tool"). It will search for avail-
able cameras in the network. If the camera with its corresponding IP address is
shown, select the camera by double-clicking on it and then click on "Connect".
Please note:
In your network a DHCP server must be active (e.g. the DHCP server of a router).
The PC must be confi gured so that it assigns an IP address automatically. The
camera is also assigned an IP address by the DHCP server.
If there is no DHCP server, the camera has the IP address 192.168.1.200 (net-
work mask 255.255.255.0). It is important that this IP address is not already
used by another device in the network. Otherwise, there is no access to the
camera!
• If the camera requests a user name and password, you have to enter "admin" for
both (written in lower case letters and without quotation marks).
• We recommend you to use Internet Explorer as the internet browser in order to be
able to use all functions of the camera. Prior to connecting to the camera, you have
to install an ActiveX plug-in.
Depending on the security settings for your Internet Explorer an error message
might appear, saying a required ActiveX element cannot be installed or that the in-
stallation of the ActiveX can be started manually by clicking on the information bar.
This ActiveX element is necessary for the camera image to be shown.
• Furthermore, modifi cations to the settings of the antivirus or fi rewall programmes
may be required in order to have the software working fl awlessly.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sygonix 43176A LAN Camera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sygonix 43176A LAN Camera in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info