Manual Sygonix 1625525 (page 4 of 6) (English, German, Dutch)

707195

Zoom out

Zoom in

1/6

7. Press the “UP” button repeatedly until the desired weekday setting (weekday or weekday combination)

is displayed. The weekday settings are displayed in the following order:

MO � TU � WE � TH � FR � SA � SU

� MO TU WE TH FR � SA SU � MO TU WE TH FR SA

� MO WE FR � TU TH SA � MO TU WE � TH FR SA

� MO TU WE TH FR SA SU

8. Press the “PROG” button to conrm your selection and to set the off time for the rst program. The

display will show “OFF” (off). Set the turn-off time according to the instructions provided in steps 2 to 8.

9. Press the “PROG” button to program additional turn-on and turn-off times, or press the “OK” button to

select the clock time mode. If you want to program additional turn-on and turn-off times, proceed as

described in steps 2 to 9.

10. In clock time mode, press the “SET” button to select “AUTO”, “OFF” or “ON” mode. The modes are

displayed in the following order.

AUTO (Power switched on. Timer activated)

� OFF (Power switched off. Timer deactivated)

� ON (Power switched on. Timer deactivated)

11. In order to delete a program, press the “PROG” button repeatedly until the desired program is displayed.

You have to delete each turn-on and turn-off time separately. Press the “CLEAR” button to delete the

selected program. The program will be deleted immediately without any conrmation prompt.

c) Random function

If the random function is activated it has priority over programmed turn-on and turn-off times. It is not

necessary to program a period during which the random function will activate. The random function will

activate several times randomly between 18:00 and 6:00 o’clock for a maximum ON/OFF cycle of one hour.

Press the “SET” button to select “AUTO” mode. Simultaneously press the “SET” and “UP” buttons to activate

or deactivate the random function. The display will show “RANDOM” indicating the random function being

activated.

d) Countdown function

This function is intended for a device to turn on or off after a certain time has elapsed. The countdown

function is only available in “ON” and “OFF” modes. In “ON” mode, the power will switch off after the set time

has elapsed. In “OFF” mode, the power will switch on after the set time has elapsed. Set the time to elapse

until switching on or off the power as follows:

1. Connect a device and switch it on.

2. Simultaneously press the “PROG” and “UP” buttons to program the countdown function. The display will

show “COUNTDOWN”. Set the time between 1 minute up to 99 hours and 59 minutes.

3. Press the “SET” button. The ► symbol in front of “HOURS” starts ashing.

4. Press the “UP” button repeatedly until the desired hours are displayed. Press and hold the “UP” button

to quickly scan through the hours. Use this procedure to set the “MINUTES” next.

5. Press the “SET” button. The ► symbol in front of “MINUTES” starts ashing.

6. Press the “UP” button repeatedly until the desired minutes are displayed.

7. Press the “OK” button to start the countdown. “COUNTDOWN” starts ashing and the set time starts

counting backwards in the display.

8. After the set countdown has elapsed, the device will turn on or off depending on the respective operating

mode.

9. Simultaneously press the “PROG” and “UP” buttons to deactivate the countdown function.

e) Resetting the device

In case of malfunctions, if the display does not work properly or if pressing a button does not cause any

response of the device, press the “RESET” button. In order to do so, use an object with a round tip or the

end of a paper clip. All stored data will be reset. You will have to set the clock time and any programmed

times again.

If the rechargeable battery is not completely discharged and still contains a small amount of

power, the display will not turn on. Connect the timer to a wall socket (230 V/AC, 50 Hz) and

press the “RESET” button to reset the device and to activate the display.

If the built-in battery is completely discharged, connect the timer to a wall socket. The display will

turn on immediately.

Care and cleaning

• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the

casing or cause the product to malfunction.

• Unplug the timer from the wall socket before cleaning.

• Never submerge the product in water or other liquids.

• There are no user-serviceable parts inside the product. Never open/dismantle the product.

• To clean the product, a dry, soft and clean cloth is sufcient. Do not apply too much pressure to the housing

to prevent scratching.

• You can easily remove dust using a long-haired, soft and clean brush.

Disposal

a) Product

Electronic devices are recyclable waste and must not be disposed of in household.

Always dispose of the product according to the relevant statutory regulations.

b) (Rechargeable) batteries

You as the end user are required by law to return all used batteries. Placing batteries in

household waste is prohibited.

Batteries contain harmful chemicals and are labelled with this symbol to indicate that disposal

in household waste is forbidden. The abbreviations for heavy metals in batteries are: Cd =

Cadmium, Hg = Mercury, Pb = Lead (indicated on the battery, e.g. below the trash icon on the

left).

Used (rechargeable) batteries can be returned to local collection points, our stores or battery retailers.

You thus full your statutory obligations and contribute to the protection of the environment.

Technical data

Operating voltage ................................. 230 V/AC, 50 Hz

Backup battery ...................................... 1 x 2.4 V, 40 mAh NiMH rechargeable battery

Switching power ................................... max. 3680 W

Switching current .................................. max. 16 A

Standby power consumption ................ 0.45 W

Programs .............................................. 16 turn-on and turn-off programs

Setting time ........................................... min. 1 minute, max. 7 days

Time display .........................................24 or 12 hours

Storage/operating temperature ............. 0 to 50° C

Dimensions (W x H x D) ....................... 73 x 145 x 80 mm

Weight ..................................................202 g

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represents the technical status at the time of printing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sygonix 1625525 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sygonix 1625525 Manual

Product: