534949
42
Zoom out
Zoom in
Previous page
1/48
Next page
Operating the Transmitter
42
4 Operating the Transmitter
Check the transmitter and receiver are working properly each time before the equipment is
put into operation.
Switching the transmitter on/off
1. Set the On/Off switch to position I". The Power LED lights up green. The transmitter is now
ready to operate.
The Power LED turns red when the battery charge becomes too low.
2. Position the transmitter in a good position for the monitoring tasks required and align the lens to
the area to be monitored.
3. To switch the transmitter off, set the On/Off switch to position O".
Night vision
The transmitter is equipped with 6 infrared diodes. This enables the transmission of pictures from
areas which are not illuminated. The night vision function is activated automatically when the light
conditions make it necessary.
When the night vision function is activated, the screen display on the receiver turns to black
and white.
Setting the VOX sensitivity
The VOX
1
function (sound detection) causes the system to start transmitting automatically from the
transmitter to the receiver immediately a voice or sound is detected.
There is a slight delay in the transmission before the receiver can reproduce the voice/sound
and picture.
The VOX sensitivity can be continuously regulated using the rotary VOX knob.
Adjusting the knob clockwise: The system is activated by relatively quiet sounds.
Adjusting the knob counterclockwise: The system is only activated by relatively loud sounds.
If no voice or sound is detected for longer than one minute, transmission is automatically inter-
rupted.
Setting the picture focus
The picture focus can be adjusted by means of the lens, if necessary. Turn the front part of the lens in
or out slightly to adjust the picture focus.
1
VOX: Voice Operated Transmission = sound detection
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Switel BCF805 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Switel BCF805 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info