664338

Swan SK32010N - Coffee 2 Go Manual

4
Zoom out
Zoom in
Previous page
1/8
Next page
4
HOW TO USE
Parts
1. Water tank
2. Lid
3. Lid handle
4. Filter housing
5. Thermal mug lid
6. Thermal mug
7. Mug tray
8. On button «Start»
9. Filter holder
10. Filter
11. Measuring spoon
PREPARATION & FIRST USE
Unpack the unit completely and remove any stickers that can
prevent unit operation. Check the unit for damage, do not use it in
case of damage.
Before switching the unit on, make sure that your home mains
voltage corresponds to unit operating voltage.
Wash all removable parts: the thermal mug (6) with the lid (5), the
holder (9), the filter (10) with warm water and neutral detergent.
Rinse and dry thoroughly.
Install the holder (9) in such way that the holder handle is on the left
(pic. 1).
Install the filter (10) into the holder (9) in such way that the filter handle is on the right (pic. 1).
Fill the mug (6) with clean water.
Open the lid (2) and pour the water from the mug (6) into the water tank (1). The water level
should not exceed the «MAX» mark.
• Put the mug (6) on the tray (7). Use the mug without the lid (5).
• Insert the power plug into the mains socket.
• Press the «Start» button (8).
• When the mug (6) is filled with water, remove it from the tray (7) and discard the water.
• Let the unit cool down for 5 minutes.
• This process will clean all the internal components and ready your coffee maker for use.
MAKING COFFEE
The Coffee 2 Go drink is made by passing of hot water through a layer of ground coffee (or
loose tea) in the filter. The taste of the finished drink depends on the quality of raw products,
that’s why we recommend using good quality ground coffee beans and high-quality loose leaf
tea.
• Open the lid (2), install the holder (9) in such way that the holder handle is on the left
(pic.1).
• Install the filter (10) in such way that the filter holder is on the right (pic. 1).
• Measure the required amount of ground coffee or loose tea and put it into the filter (10).
1-2 scoops is typical amount depending on taste.
• Fill the mug (6) with water and then pour the water from the mug (6) into the water tank
(1). The water level should not exceed the «MAX» mark.
• Close the lid (2).
• Put the mug (6) on the tray (7). Use the mug without the lid (5).
• Insert the power plug into the mains socket. Switch the coffee maker on by pressing the
«Start» button (8), the button indicator will light up.
SK32010N_IM.indd 4 31/01/2014 10:35
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swan SK32010N - Coffee 2 Go at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swan SK32010N - Coffee 2 Go in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info