664347
2
Zoom out
Zoom in
Previous page
1/11
Next page
Important safeguards
2
1. Make sure to read all the safety precautions below and look at the illustrations before
you start using the appliance.
2. Use the appliance for its intended use only.
3. The appliance is intended for household use only.
4. In order to protect against the risk of electric shock, do not immerse ironpower base
into water or any other liquids
5. Connect the appliance only to an alternating current of the voltage specified on the
rating plate and only to an earthed socket. To avoid a circuit overload, do not operate
another high wattage appliance in the same circuit.
6. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
7. During use, do not lift the appliance by power cord/supply hose.
8. Always disconnect the plug of the appliance from electrical outlet when filling with
water or emptying and when not in use.
9. Do not operate the appliance with a damaged cord or if the appliance has been
dropped or damaged,it must be taken to a qualified serviceman or manufacturer or its
service agent for examination and repair. Incorrect re-assembly can cause a risk of
electric shock when the iron is used.
10.
Keep the iron and its cord out of reach of children less than 8 years of age when it
is energized or cooling down.
11. During use, always place the power base on a stable, level and horizontal surface or
ironing board, and then place the iron on the power base.
12. Place the iron on the power base. Do not allow power cord or supply hose to touch
hot surface.
13. Burns can occur from touching hot metal parts, hot water or steam. Use caution when
using the appliance. If the iron is placed onto the iron rest plate during in use, the iron
rest plate may become a hot surface. Do not touch the iron rest plate and the
soleplate until they have cooled down completely.
14. Never use the iron facing towards people because the steam can cause burns.
15. Never twist the supply hose during use.
16. The iron must not left unattended while it is connected to the supply mains.
17. The appliance must be used or stored in a level and horizontal surface.
18. When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
19. The iron is not to be used if it has been dropped, if there are visible signs of damage
or if it is leaking.
20. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
21. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
konwledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
22. Children shall not play with the appliance. Cleaning and user maintenance shall not
be made by children without supervision.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swan SI9030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swan SI9030 in the language / languages: English as an attachment in your email.

The manual is 6,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info