664343

Swan SI4030 Manual

3
Zoom out
Zoom in
Previous page
1/4
Next page
How to Use
Before rst use
Remove any stickers, protective foil or storage cover from the soleplate.
Heat up the iron to maximum temperature and iron over a piece of damp cloth for several minutes
for the purpose of removing any residue on the soleplate.
Note: Itisnormalforaslightodourtocomefromtheunitduringtherstuse.Thisisduetolightoils
usedtopreservecomponentsduringmanufacture.Theodourwilldisappearafterrstuse.
Operation
1. Connect the power cord to outlet, the power light illuminates.
2. Press down tank lock button then take out water tank from stand. Turn the limescale lter
clockwise then draw it out – you may need to invert the tank to facilitate this. Fill the tank but do not
exceed the MAX level indication on the side.
3.Replacethelimescalelterandslidethetankbackintotheironbase,makingsureit“clicks”into
place. Check the garment label for the required ironing temperature. Then turn the temperature dial
to your desired setting. And the heating light will be illuminated.
Temperature settings
1.(onestar)80-120CSyntheticbres/silk
2.(two star) 120-160C Wool
3.(three star) 160-200C Cotton/linen
Tips: to prevent shiny spots, iron the reverse side of the fabric for silk, wool and synthetic materials;
and to prevent stains, avoid using the steam functions (put Steam ON/OFF switch in OFF position).
Once the soleplate temperature has reached the preset temperature, the heating light will go
out, press down Steam Button. The pump will start and after a few seconds the steam will come
through.Pleasenotewhenpressingthesteambuttonforthersttimeatthestartofthenewironing
session, direct the iron away from garments to allow any small amounts of water from previous
ironing sessions to be ejected.
NOTE: THE PUMP MAY MAKE A NOISE FOR A FEW SECONDS UNTIL IT IS PROPERLY
PRIMED. YOU CAN PRIME THE PUMP A LITTLE QUICKER IF YOU HOLD THE HAND UNIT
BELOW THE HEIGHT OF THE BASE - GRAVITY WILL GET THE STEAM THROUGH QUICKER!
At the beginning of the ironing session, you should iron the articles that require the lowest ironing
temperaturerst,suchasthosemadeofsyntheticbres.
Tip: the interconnection cord can become quite hot after extended use, do not touch!
At any time during the ironing session, you can place the iron on the silicone cushion or on the heel
rest (and have a nice cup of tea). Note: the steam output is 40-70g/min
Alwayscheckrstwhetheralabelwithironinginstructionsisattachedtothearticle.
The iron heats up quicker than it cools down, therefore, you should start ironing the
articlesrequiringthelowesttemperaturesuchasthosemadeofsyntheticbres.
Ifthefabricconsistsofvariouskindsofbres,youmustalwaysselectthelowestironing
temperaturetoironthecompositionofthosebres.
Silk and other fabrics that are likely to become shiny should be ironed on the inner side.
Velvet and other textures that rapidly become shiny should be ironed in one direction
with light pressure applied. Always keep the iron moving at any given moment.
Pure woollen fabrics (100% wool) may be ironed with the iron set a steam position.
Preferably set steam button to the maximum position and use a dry cloth as a mat.
Note: when ironing woolen fabrics, shining of the fabric may occur. So it is suggested
that you should turn the article inside out and iron the reverse side.
Ironing Tips
Cleaning and Maintainance
AFTER IRONING
1.Takeoutthewatertank,removethelimescalelterandemptyallthewaterout,replacethelter
then place tank back into the iron base.
2. With the tank empty, press down the steam surge button button a couple of times to remove any
remaining water in the interconnecting cord, then place the iron back on the base. Warning: the
soleplate is still hot, be careful!
3. Turn the temperature dial back to 0 position and unplug from the mains socket. Allow the iron to
completely cool before cleaning. Note: you can wipe the surface of unit clean with a soft cloth. Try
nottodislodgethesiliconecushionoutofit’smountingsbecauseitisdifculttotback!
Warning: do not immerse the steam iron or stand in water or other liquids.
AUTO-DESCALING FEATURE
Thereisalimescalelterinsidethetank.Theltercanabsorbinsolublecalciumionsandconvert
them to soluble natrium ions, which makes the water softer. This greatly reduces the build-up of
limescale.However,ifyoudoliveinahardwaterarea,thelifeofyourironwillincreasesignicantly
if you use bottled water.
Note: to keep the soleplate smooth, never let any metal materials rub against it.
REPLACE THE LIMESCALE FILTER EVERY 3 MONTHS OR MORE REGULARLY IF YOU LIVE
IN A HARD WATER AREA. VISIT WWW.SWAN-BRAND.CO.UK FOR SPARE FILTERS
wan
designed for life
wan
designed for life
Helpline Number: 0121 327 6889
WWW.SWAN-BRAND.CO.UK
Helpline Number:
0121 327 6889
WWW.SWAN-BRAND.CO.UK
SI4030N.indd 6-7 25/05/2012 10:17
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Swan SI4030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Swan SI4030 in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info