736537

SupportPlus URC-81 L - 8 in 1 Manual

7
Zoom out
Zoom in
Previous page
1/45
Next page
6
7
TV) keys simultaneously and hold both
down for 3 seconds.
3. The LED- lamp starts ashing. The OFF
signal is automatically transmitted to the
device being searched for. If the device
(TV) switches itself off, immediately press
the device key (TV) to save the code which
has been found.
4. Turn on the device again by pressing the
„ON” key or the „1” key . Check the func-
tions of the keys on the remote control unit.
If some keys do not work correctly, you can
start the search run again (see Points 2 – 3)
to establish a suitable code.
Remark: To terminate the search run press
any key or the device key. The LED lamp
stops ashing and the search run is termi-
nated. You can start the search run again at
any time.
C. Set-Up by manual search:
If setting up with brand name codes is unsuc-
cessful, you can also use the „Manual Search”
to nd the correct code to operate your device.
1. Turn on the device you would like to con-
trol. If it is a video recorder ( VCR) insert a
video tape.
2. Point the remote control unit at your de-
vice. Press and hold the SET key. Press
simultaneously the device key, that you
would like to control ( TV ).
3. The LED- lamp of the device key will be
turned on, to inform you, that you are in the
set- up mode. Release both keys.
4. Press the POWER key (ON – OFF key). If
it is a Video Recorder, DVD Player or CD
Player, please press the yellow PLAY key.
5. The LED-lamp keeps now ashing, to con-
rm the “Manual Search” mode.
6. Check the functionality of the keys, ( not
POWER – or PLAY KEY). If the keys
work properly, press the device key ( TV )
to conrm the correct code. If the keys do
not work properly, repeat step 2. to 6.
If the searched-for device switches itself
off, press the device key (TV) to terminate
the search run and to save the code which
has been found. Switch on the searched-for
device (TV) again with the POWER key
(ON – OFF key) or by pressing the „1”
key. Here too you should test the functions
of the other keys. If not all keys function
here, you can restart the search run (see
Point 2).
Remark: If the device is a video recorder
/ CD player / DVD player the „play op-
eration” is started when the code is found.
When the play operation has started you
should press the device key (VCR, CD,
DVD), to save the code which has been
found.
Now check the functions of the device keys
on your remote control unit.
If most of the keys does not function prop-
erly repeat steps 1 – 7 until the key assign-
ments function correctly.
To abort the manual search run, press any
key or the device key. The LED lamp will
switched off and the search run terminated.
The search run is automatically terminated
if no entries are made within 10 seconds.
D. Display of device codes:
The device code, which has been saved in your
remote control unit, can be called up as fol-
lows:
1. Press the SET key and hold it down. Now
actuate number key 1 to display the 3-digit
code of the 100th position. Count how of-
ten the LED ashes. If the LED doesn’t
ash the digit is ZERO. Example for Code
028:
2. Press SET and „1”
LED ashes 0 – times.
3. Press SET and „2”
LED ashes 2 – times.
4. Press SET and „3”
LED ashes 8 – times.
E. Reset / delete function:
To delete the codes, which have been entered
in the remote control unit, press and hold down
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SupportPlus URC-81 L - 8 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SupportPlus URC-81 L - 8 in 1 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info