586876
5
Zoom out
Zoom in
Previous page
1/32
Next page
Easy SET-UP to operate your AMPLIFIER
The set-up to operate your AMPLIFIER is as follows:
1. Insert 2 new alkaline 1.5V batteries AAA/LR03 into the back of your RC 7; Follow the markings in the
battery compartment.
2. Switch on your AMPLIFIER.
3. Look for the brand name of your AMPLIFIER (e.g. Sony) on the attached list with codes.
4. Next to the brand name you will find one or more 3-digit code numbers which have to be entered
into your RC 7 remote control.
5. Press the key on your RC 7
6. Press the TUNER/ key (for about 5 seconds) until the LED flashes twice.
7. Press again the TUNER/ key shortly.
8. Enter the first 3-digit code from the list (e.g. for Sony) with the number keys on
your RC 7.
9. The LED will blink twice to indicate that the code has been accepted.
10. Aim your RC 7 at your AMPLIFIER and press the key.Your RC 7 is set up correctly if
your AMPLIFIER switches off.
11. If your AMPLIFIER does not react and/or it operates incorrectly, repeat step 3. to step 9. by entering
the next 3-digit code from the list.
12. If none of the 3-digits codes of this form operates your AMPLIFIER properly, use the ”Search
Method” of your RC 7 remote control.
Search Method
If the Easy Set-Up procedure was not successfully, try the Automatic Search Method on your RC 7
remote control:
A. Make sure that 2 new batteries have been inserted correctly (see step 1. of the Easy Set-Up).
B. Switch on your TELEVISION.
C. Press the key on your RC 7 (for about 5 seconds) until the LED flashes twice.
D. Enter code with the number keys of your RC 7.The LED blinks twice.
E. Continue pressing the key on your RC 7 until your TELEVISION switches off.This step
may take up to 15 minutes. (Using the Search Method in VCR, CD or TAPE-mode, continue pressing
the key; in TUNER-mode, continue pressing the key).
F. Now press the key on your RC 7 again until the LED flashes twice.
G.If your TELEVISION operates incorrectly, repeat step B. to step F.A new code search begins with the
last code number found in the previous search. Please be patient.There may be many codes to search
through before the code for your device is found.
Special Functions of your RC 7:
Brightness / colour / contrast / etc.
Adjusting brightness / colour / contrast / bass / treble / balance of your television with your RC 7
remote control:
1. Make sure your RC 7 is in the TV-mode (Press ).
2. Press /SHIFT.
3. Press within 5 seconds: brightness. colour.
contrast. treble.
bass. balance.
4. Use the and to adjust the settings of your television.
5. After 5 seconds your RC 7 will return to the normal functions to operate the channel selection.
OK key on your RC 7
TV-Mode Resets your TELEVISION to the basic settings.
TV-Mode/menu Confirmation key.
VCR-Mode Recording key (press twice).
• SAT-Mode Confirmation key.
TAPE-Mode Recording key (press twice).
Make a note of the 3-digits codes of your devices for future reference, because you will
need these codes to set-up your RC 7 remoet control again after replacing the batteries):
TV VCR SAT CD TAPE TUNER
AMPLIFIER
7 8 7
0 0 1
1 2
3 4
5 6
TV
TV
2
TV
AUD
SAT
SAT
+
-
Downloaded from www.Manualslib.com manuals search engine
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Support plus URC 277 - 7 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Support plus URC 277 - 7 in 1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info