464688
3
Zoom out
Zoom in
Previous page
1/5
Next page
Setup
1. Function Indicator
Logo lights up as an indicator or confirmation sign in following states.
(1) Logo Lights up when the code(s) loaded key(s) is pressed.
(2) Subject to different original code types; Logo will light up or keep
blinking when IR code is transmitting from an original remote to
SRC-600 during learning process (Refer to No. 2 in Setup section)
(3) Logo lights up as a battery low indicator (Refer to No. 4 in Setup section)
SRC-600 is a 6 in 1 universal remote. There are 3 device icons and a “Group2”
symbol available for distinguishing among devices.
(1) The device icon lights up to enable you identify which device you are
controlling by pressing the key(s).
(2) The “Group2” symbol lights up to indicating the operation status of the
device 4,5 & 6.
(1) The “Learn” symbol lights up when entering “Learn” mode.
(2) The “Learn” symbol keeps blinking when the learning process starts.
*
Note:
The abovementioned 3 LED always light up as an indicator when necessary
[Functional key] can turn on the backlight or switch on/off beep sound.
(1) By pressing
, the keys will be lighted up for 8 sec. If keep pressing any
other key during the light-up period, the light will continue for another 8 sec.,
and so on.
(2) The beep sound can be turned on/off by pressing
for 3 sec. (Refer to No.
3 in Setup section).
[System key] will be used for switching the devices and activating setup
(learning) function.
(1) SRC-600 opens only 3 devices for setup by factory default; however if you
need more devices for setup, you can open another 3 spare devices by
pressing
[ and ] simultaneously for 1 sec., and you will find “Group2”
shows up. You are then able to setup up to 6 devices at the moment.
You will be able to switch among the default 3 devices and another 3 spare
devices in “Group2” by keeping pressing system key
.
(2) By pressing
for 3 sec., the unit will enter “Learn” mode (Refer to No.2 in
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunwave SRC-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunwave SRC-600 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info