464689
15
Zoom out
Zoom in
Previous page
1/16
Next page
28
TROUBLESHOOTING GUIDE
If you have trouble configuring or operating
the remote, first check that you have inserted
the batteries correctly. Then check this chart.
Problem Solution
LCD does not
display when
touched
1. Batteries may be
dead. Replace the
batteries with three
new AAA alkaline
batteries.
2. Check that the
batteries are properly
installed.
The unit won’t
operate a
device
1. Ensure that the desired
DEVICE KEY has been
selected.
2. Move closer to the
target device. The
maximum operating
distance is
approximately 30 feet.
3. Ensure you are aiming
the unit directly at the
target device and
there are no
obstructions between
the unit and the target
device.
4. Ensure programming
with the learning
function or the
manufacturer codes
has been properly
done.
29
Problem Solution
Your VCR will
not record
As a safety feature, you
must press
on the
unit for two seconds
You cannot
operate the
target device
even after
teaching it
using the
learning
function
1. Ensure that the unit has
correctly learned the
target device’s remote
control code.
2. Delete the device data
from the unit and carry
out the learning
function again.
3. Ensure you did not
program more than
one remote for a given
device.
You see
displayed on
the LCD during
the learning
procedure
1. Ensure you hold the
target remote’s key
until the screen displays
or .
2. Ensure the unit and the
target remote are not
too close or too far
apart — keep them
about 2-4 inches apart.
3. Make sure your target
device’s remote
control is aimed
directly at the unit’s
learning eye.
Your existing
remote has a
key that
performs two or
more functions
Some remotes issue
multiple commands when
a key is held down.
Teach the unit the
different commands. The
unit can only learn one
command for each key.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunwave SRC-3060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunwave SRC-3060 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info