464685

Sunwave SR1200 Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
8
GB
Smart Learning (Fast Learning)
If you cannot find your URC a correct Device Code for your equipment
from the Online Database, you can copy your original A/V remote control
commands to your URC via Learning. Your URC allows you to capture up
to 360 additional remote control commands and all 8 device modes can
facilitate learning in a second. Please follow the below instruction to start:
(Do not forget to have your original A/V remote control ready for your
learning process)
1. Select a desired Device Mode (e.g. TV, if you want to set up your URC to
operate your TV).
2. Press and Hold the Device Mode key (e.g. ) for 3 seconds, the LED
indicator will light up.
3. Release the Device Mode key (e.g. ).
4. Press and Release a desired key on the URC you want to hold the
command, the LED will flash slowly.
(Now aim your A/V remote control to the
URC Infra red Lens on a flat surface with
1–3 cm apart. Make sure your A/V remote
control is loaded with fresh batteries).
5. Press and Hold the corresponding key on
your original A/V remote control to transfer
the command. The LED indicator of the
URC will flash. When the command has
been learnt successfully, the LED indicator
will stay on. You can release the key on the A/V remote control. If the LED
indicator keeps flashing quickly, it shows error in learning process. Adjust
the position of both remote controls and repeat steps 4 & 5 again.
6. Repeat steps 4 & 5 to transfer other commands into the rest of the
function keys.
7. When you finished the whole device mode, Press and Hold the
corresponding Device Mode key (e.g. ) for 3 seconds to save all
the learnt command and exit the learning mode.
Remarks:
– Your URC will quit the learning mode automatically after 30 seconds
of idle period.
– If you want to quit the learning mode at any time, simply Press and
Hold the corresponding Device Mode key for 3 seconds.
– Downloading a new Device Code from the Online Setup will
automatically erase and replace all learned commands in the chosen
device mode.
– When you finished learning the original remote to your URC, you can
upload your URC to our ONLINE DATABASE for future retrieval, simply
connecting your URC with your PC, the system will prompt for your
action automatically.
– Master Reset of URC will erase your learned commands.
TV
TV
TV
1–3 cm
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunwave SR1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunwave SR1200 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info